Java tutorial
/* * Copyright 2015 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package com.quectel.camera2test; import android.Manifest; import android.app.Activity; import android.app.AlertDialog; import android.app.Dialog; import android.app.DialogFragment; import android.app.Fragment; import android.content.Context; import android.content.DialogInterface; import android.content.pm.PackageManager; import android.graphics.ImageFormat; import android.graphics.Matrix; import android.graphics.Point; import android.graphics.RectF; import android.graphics.SurfaceTexture; import android.hardware.SensorManager; import android.hardware.camera2.CameraAccessException; import android.hardware.camera2.CameraCaptureSession; import android.hardware.camera2.CameraCharacteristics; import android.hardware.camera2.CameraDevice; import android.hardware.camera2.CameraManager; import android.hardware.camera2.CameraMetadata; import android.hardware.camera2.CaptureFailure; import android.hardware.camera2.CaptureRequest; import android.hardware.camera2.CaptureResult; import android.hardware.camera2.DngCreator; import android.hardware.camera2.TotalCaptureResult; import android.hardware.camera2.params.StreamConfigurationMap; import android.media.Image; import android.media.ImageReader; import android.media.MediaScannerConnection; import android.net.Uri; import android.os.AsyncTask; import android.os.Bundle; import android.os.Environment; import android.os.Handler; import android.os.HandlerThread; import android.os.Looper; import android.os.Message; import android.os.SystemClock; import android.support.v4.app.ActivityCompat; import android.util.Log; import android.util.Size; import android.util.SparseIntArray; import android.view.LayoutInflater; import android.view.OrientationEventListener; import android.view.Surface; import android.view.TextureView; import android.view.View; import android.view.ViewGroup; import android.widget.Toast; import java.io.File; import java.io.FileOutputStream; import java.io.IOException; import java.io.OutputStream; import java.nio.ByteBuffer; import java.text.SimpleDateFormat; import java.util.ArrayList; import java.util.Arrays; import java.util.Collections; import java.util.Comparator; import java.util.Date; import java.util.List; import java.util.Locale; import java.util.Map; import java.util.TreeMap; import java.util.concurrent.Semaphore; import java.util.concurrent.TimeUnit; import java.util.concurrent.atomic.AtomicInteger; /** * A fragment that demonstrates use of the Camera2 API to capture RAW and JPEG photos. * <p/> * In this example, the lifecycle of a single request to take a photo is: * <ul> * <li> * The user presses the "Picture" button, resulting in a call to {@link #takePicture()}. * </li> * <li> * {@link #takePicture()} initiates a pre-capture sequence that triggers the camera's built-in * auto-focus, auto-exposure, and auto-white-balance algorithms (aka. "3A") to run. * </li> * <li> * When the pre-capture sequence has finished, a {@link CaptureRequest} with a monotonically * increasing request ID set by calls to {@link CaptureRequest.Builder#setTag(Object)} is sent to * the camera to begin the JPEG and RAW capture sequence, and an * {@link ImageSaver.ImageSaverBuilder} is stored for this request in the * {@link #mJpegResultQueue} and {@link #mRawResultQueue}. * </li> * <li> * As {@link CaptureResult}s and {@link Image}s become available via callbacks in a background * thread, a {@link ImageSaver.ImageSaverBuilder} is looked up by the request ID in * {@link #mJpegResultQueue} and {@link #mRawResultQueue} and updated. * </li> * <li> * When all of the necessary results to save an image are available, the an {@link ImageSaver} is * constructed by the {@link ImageSaver.ImageSaverBuilder} and passed to a separate background * thread to save to a file. * </li> * </ul> */ public class Camera2RawFragment extends Fragment implements View.OnClickListener, ActivityCompat.OnRequestPermissionsResultCallback { /** * Conversion from screen rotation to JPEG orientation. */ private static final SparseIntArray ORIENTATIONS = new SparseIntArray(); private static final int REQUEST_CAMERA_PERMISSION = 1; static { ORIENTATIONS.append(Surface.ROTATION_0, 0); ORIENTATIONS.append(Surface.ROTATION_90, 90); ORIENTATIONS.append(Surface.ROTATION_180, 180); ORIENTATIONS.append(Surface.ROTATION_270, 270); } /** * Request code for camera permissions. */ private static final int REQUEST_CAMERA_PERMISSIONS = 1; /** * Permissions required to take a picture. */ private static final String[] CAMERA_PERMISSIONS = { Manifest.permission.CAMERA, Manifest.permission.READ_EXTERNAL_STORAGE, Manifest.permission.WRITE_EXTERNAL_STORAGE, }; /** * Timeout for the pre-capture sequence. */ private static final long PRECAPTURE_TIMEOUT_MS = 1000; /** * Tolerance when comparing aspect ratios. */ private static final double ASPECT_RATIO_TOLERANCE = 0.005; /** * Max preview width that is guaranteed by Camera2 API */ private static final int MAX_PREVIEW_WIDTH = 1920; /** * Max preview height that is guaranteed by Camera2 API */ private static final int MAX_PREVIEW_HEIGHT = 1080; /** * Tag for the {@link Log}. */ private static final String TAG = "Camera2RawFragment"; /** * Camera state: Device is closed. */ private static final int STATE_CLOSED = 0; /** * Camera state: Device is opened, but is not capturing. */ private static final int STATE_OPENED = 1; /** * Camera state: Showing camera preview. */ private static final int STATE_PREVIEW = 2; /** * Camera state: Waiting for 3A convergence before capturing a photo. */ private static final int STATE_WAITING_FOR_3A_CONVERGENCE = 3; /** * An {@link OrientationEventListener} used to determine when device rotation has occurred. * This is mainly necessary for when the device is rotated by 180 degrees, in which case * onCreate or onConfigurationChanged is not called as the view dimensions remain the same, * but the orientation of the has changed, and thus the preview rotation must be updated. */ private OrientationEventListener mOrientationListener; /** * {@link TextureView.SurfaceTextureListener} handles several lifecycle events of a * {@link TextureView}. */ private final TextureView.SurfaceTextureListener mSurfaceTextureListener = new TextureView.SurfaceTextureListener() { @Override public void onSurfaceTextureAvailable(SurfaceTexture texture, int width, int height) { configureTransform(width, height); } @Override public void onSurfaceTextureSizeChanged(SurfaceTexture texture, int width, int height) { configureTransform(width, height); } @Override public boolean onSurfaceTextureDestroyed(SurfaceTexture texture) { synchronized (mCameraStateLock) { mPreviewSize = null; } return true; } @Override public void onSurfaceTextureUpdated(SurfaceTexture texture) { } }; /** * An {@link AutoFitTextureView} for camera preview. */ private AutoFitTextureView mTextureView; /** * An additional thread for running tasks that shouldn't block the UI. This is used for all * callbacks from the {@link CameraDevice} and {@link CameraCaptureSession}s. */ private HandlerThread mBackgroundThread; /** * A counter for tracking corresponding {@link CaptureRequest}s and {@link CaptureResult}s * across the {@link CameraCaptureSession} capture callbacks. */ private final AtomicInteger mRequestCounter = new AtomicInteger(); /** * A {@link Semaphore} to prevent the app from exiting before closing the camera. */ private final Semaphore mCameraOpenCloseLock = new Semaphore(1); /** * A lock protecting camera state. */ private final Object mCameraStateLock = new Object(); // ********************************************************************************************* // State protected by mCameraStateLock. // // The following state is used across both the UI and background threads. Methods with "Locked" // in the name expect mCameraStateLock to be held while calling. /** * ID of the current {@link CameraDevice}. */ private String mCameraId; /** * A {@link CameraCaptureSession } for camera preview. */ private CameraCaptureSession mCaptureSession; /** * A reference to the open {@link CameraDevice}. */ private CameraDevice mCameraDevice; /** * The {@link Size} of camera preview. */ private Size mPreviewSize; /** * The {@link CameraCharacteristics} for the currently configured camera device. */ private CameraCharacteristics mCharacteristics; /** * A {@link Handler} for running tasks in the background. */ private Handler mBackgroundHandler; /** * A reference counted holder wrapping the {@link ImageReader} that handles JPEG image * captures. This is used to allow us to clean up the {@link ImageReader} when all background * tasks using its {@link Image}s have completed. */ private RefCountedAutoCloseable<ImageReader> mJpegImageReader; /** * A reference counted holder wrapping the {@link ImageReader} that handles RAW image captures. * This is used to allow us to clean up the {@link ImageReader} when all background tasks using * its {@link Image}s have completed. */ private RefCountedAutoCloseable<ImageReader> mRawImageReader; /** * Whether or not the currently configured camera device is fixed-focus. */ private boolean mNoAFRun = false; /** * Number of pending user requests to capture a photo. */ private int mPendingUserCaptures = 0; /** * Request ID to {@link ImageSaver.ImageSaverBuilder} mapping for in-progress JPEG captures. */ private final TreeMap<Integer, ImageSaver.ImageSaverBuilder> mJpegResultQueue = new TreeMap<>(); /** * Request ID to {@link ImageSaver.ImageSaverBuilder} mapping for in-progress RAW captures. */ private final TreeMap<Integer, ImageSaver.ImageSaverBuilder> mRawResultQueue = new TreeMap<>(); /** * {@link CaptureRequest.Builder} for the camera preview */ private CaptureRequest.Builder mPreviewRequestBuilder; /** * The state of the camera device. * * @see #mPreCaptureCallback */ private int mState = STATE_CLOSED; /** * Timer to use with pre-capture sequence to ensure a timely capture if 3A convergence is * taking too long. */ private long mCaptureTimer; //********************************************************************************************** /** * {@link CameraDevice.StateCallback} is called when the currently active {@link CameraDevice} * changes its state. */ private final CameraDevice.StateCallback mStateCallback = new CameraDevice.StateCallback() { @Override public void onOpened(CameraDevice cameraDevice) { // This method is called when the camera is opened. We start camera preview here if // the TextureView displaying this has been set up. synchronized (mCameraStateLock) { mState = STATE_OPENED; mCameraOpenCloseLock.release(); mCameraDevice = cameraDevice; // Start the preview session if the TextureView has been set up already. if (mPreviewSize != null && mTextureView.isAvailable()) { createCameraPreviewSessionLocked(); } } } @Override public void onDisconnected(CameraDevice cameraDevice) { synchronized (mCameraStateLock) { mState = STATE_CLOSED; mCameraOpenCloseLock.release(); cameraDevice.close(); mCameraDevice = null; } } @Override public void onError(CameraDevice cameraDevice, int error) { Log.e(TAG, "Received camera device error: " + error); synchronized (mCameraStateLock) { mState = STATE_CLOSED; mCameraOpenCloseLock.release(); cameraDevice.close(); mCameraDevice = null; } Activity activity = getActivity(); if (null != activity) { activity.finish(); } } }; /** * This a callback object for the {@link ImageReader}. "onImageAvailable" will be called when a * JPEG image is ready to be saved. */ private final ImageReader.OnImageAvailableListener mOnJpegImageAvailableListener = new ImageReader.OnImageAvailableListener() { @Override public void onImageAvailable(ImageReader reader) { dequeueAndSaveImage(mJpegResultQueue, mJpegImageReader); } }; /** * This a callback object for the {@link ImageReader}. "onImageAvailable" will be called when a * RAW image is ready to be saved. */ private final ImageReader.OnImageAvailableListener mOnRawImageAvailableListener = new ImageReader.OnImageAvailableListener() { @Override public void onImageAvailable(ImageReader reader) { dequeueAndSaveImage(mRawResultQueue, mRawImageReader); } }; /** * A {@link CameraCaptureSession.CaptureCallback} that handles events for the preview and * pre-capture sequence. */ private CameraCaptureSession.CaptureCallback mPreCaptureCallback = new CameraCaptureSession.CaptureCallback() { private void process(CaptureResult result) { synchronized (mCameraStateLock) { switch (mState) { case STATE_PREVIEW: { // We have nothing to do when the camera preview is running normally. break; } case STATE_WAITING_FOR_3A_CONVERGENCE: { boolean readyToCapture = true; if (!mNoAFRun) { Integer afState = result.get(CaptureResult.CONTROL_AF_STATE); if (afState == null) { break; } // If auto-focus has reached locked state, we are ready to capture readyToCapture = (afState == CaptureResult.CONTROL_AF_STATE_FOCUSED_LOCKED || afState == CaptureResult.CONTROL_AF_STATE_NOT_FOCUSED_LOCKED); } // If we are running on an non-legacy device, we should also wait until // auto-exposure and auto-white-balance have converged as well before // taking a picture. if (!isLegacyLocked()) { Integer aeState = result.get(CaptureResult.CONTROL_AE_STATE); Integer awbState = result.get(CaptureResult.CONTROL_AWB_STATE); if (aeState == null || awbState == null) { break; } readyToCapture = readyToCapture && aeState == CaptureResult.CONTROL_AE_STATE_CONVERGED && awbState == CaptureResult.CONTROL_AWB_STATE_CONVERGED; } // If we haven't finished the pre-capture sequence but have hit our maximum // wait timeout, too bad! Begin capture anyway. if (!readyToCapture && hitTimeoutLocked()) { Log.w(TAG, "Timed out waiting for pre-capture sequence to complete."); readyToCapture = true; } if (readyToCapture && mPendingUserCaptures > 0) { // Capture once for each user tap of the "Picture" button. while (mPendingUserCaptures > 0) { captureStillPictureLocked(); mPendingUserCaptures--; } // After this, the camera will go back to the normal state of preview. mState = STATE_PREVIEW; } } } } } @Override public void onCaptureProgressed(CameraCaptureSession session, CaptureRequest request, CaptureResult partialResult) { process(partialResult); } @Override public void onCaptureCompleted(CameraCaptureSession session, CaptureRequest request, TotalCaptureResult result) { process(result); } }; /** * A {@link CameraCaptureSession.CaptureCallback} that handles the still JPEG and RAW capture * request. */ private final CameraCaptureSession.CaptureCallback mCaptureCallback = new CameraCaptureSession.CaptureCallback() { @Override public void onCaptureStarted(CameraCaptureSession session, CaptureRequest request, long timestamp, long frameNumber) { String currentDateTime = generateTimestamp(); File rawFile = new File(Environment.getExternalStoragePublicDirectory(Environment.DIRECTORY_DCIM), "RAW_" + currentDateTime + ".dng"); File jpegFile = new File(Environment.getExternalStoragePublicDirectory(Environment.DIRECTORY_DCIM), "JPEG_" + currentDateTime + ".jpg"); // Look up the ImageSaverBuilder for this request and update it with the file name // based on the capture start time. ImageSaver.ImageSaverBuilder jpegBuilder; ImageSaver.ImageSaverBuilder rawBuilder; int requestId = (int) request.getTag(); synchronized (mCameraStateLock) { jpegBuilder = mJpegResultQueue.get(requestId); rawBuilder = mRawResultQueue.get(requestId); } if (jpegBuilder != null) jpegBuilder.setFile(jpegFile); if (rawBuilder != null) rawBuilder.setFile(rawFile); } @Override public void onCaptureCompleted(CameraCaptureSession session, CaptureRequest request, TotalCaptureResult result) { int requestId = (int) request.getTag(); ImageSaver.ImageSaverBuilder jpegBuilder; ImageSaver.ImageSaverBuilder rawBuilder; StringBuilder sb = new StringBuilder(); // Look up the ImageSaverBuilder for this request and update it with the CaptureResult synchronized (mCameraStateLock) { jpegBuilder = mJpegResultQueue.get(requestId); rawBuilder = mRawResultQueue.get(requestId); if (jpegBuilder != null) { jpegBuilder.setResult(result); sb.append("Saving JPEG as: "); sb.append(jpegBuilder.getSaveLocation()); } if (rawBuilder != null) { rawBuilder.setResult(result); if (jpegBuilder != null) sb.append(", "); sb.append("Saving RAW as: "); sb.append(rawBuilder.getSaveLocation()); } // If we have all the results necessary, save the image to a file in the background. handleCompletionLocked(requestId, jpegBuilder, mJpegResultQueue); handleCompletionLocked(requestId, rawBuilder, mRawResultQueue); finishedCaptureLocked(); } showToast(sb.toString()); } @Override public void onCaptureFailed(CameraCaptureSession session, CaptureRequest request, CaptureFailure failure) { int requestId = (int) request.getTag(); synchronized (mCameraStateLock) { mJpegResultQueue.remove(requestId); mRawResultQueue.remove(requestId); finishedCaptureLocked(); } showToast("Capture failed!"); } }; /** * A {@link Handler} for showing {@link Toast}s on the UI thread. */ private final Handler mMessageHandler = new Handler(Looper.getMainLooper()) { @Override public void handleMessage(Message msg) { Activity activity = getActivity(); if (activity != null) { Toast.makeText(activity, (String) msg.obj, Toast.LENGTH_SHORT).show(); } } }; public static Camera2RawFragment newInstance() { return new Camera2RawFragment(); } @Override public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { return inflater.inflate(R.layout.fragment_camera2_basic, container, false); } @Override public void onViewCreated(final View view, Bundle savedInstanceState) { view.findViewById(R.id.picture).setOnClickListener(this); view.findViewById(R.id.info).setOnClickListener(this); mTextureView = (AutoFitTextureView) view.findViewById(R.id.texture); // Setup a new OrientationEventListener. This is used to handle rotation events like a // 180 degree rotation that do not normally trigger a call to onCreate to do view re-layout // or otherwise cause the preview TextureView's size to change. mOrientationListener = new OrientationEventListener(getActivity(), SensorManager.SENSOR_DELAY_NORMAL) { @Override public void onOrientationChanged(int orientation) { if (mTextureView != null && mTextureView.isAvailable()) { configureTransform(mTextureView.getWidth(), mTextureView.getHeight()); } } }; } @Override public void onResume() { super.onResume(); startBackgroundThread(); openCamera(); // When the screen is turned off and turned back on, the SurfaceTexture is already // available, and "onSurfaceTextureAvailable" will not be called. In that case, we should // configure the preview bounds here (otherwise, we wait until the surface is ready in // the SurfaceTextureListener). if (mTextureView.isAvailable()) { configureTransform(mTextureView.getWidth(), mTextureView.getHeight()); } else { mTextureView.setSurfaceTextureListener(mSurfaceTextureListener); } if (mOrientationListener != null && mOrientationListener.canDetectOrientation()) { mOrientationListener.enable(); } } @Override public void onPause() { if (mOrientationListener != null) { mOrientationListener.disable(); } closeCamera(); stopBackgroundThread(); super.onPause(); } @Override public void onRequestPermissionsResult(int requestCode, String[] permissions, int[] grantResults) { if (requestCode == REQUEST_CAMERA_PERMISSIONS) { for (int result : grantResults) { if (result != PackageManager.PERMISSION_GRANTED) { showMissingPermissionError(); return; } } } else { super.onRequestPermissionsResult(requestCode, permissions, grantResults); } } @Override public void onClick(View view) { switch (view.getId()) { case R.id.picture: { takePicture(); break; } case R.id.info: { Activity activity = getActivity(); if (null != activity) { new AlertDialog.Builder(activity).setMessage(R.string.intro_message) .setPositiveButton(android.R.string.ok, null).show(); } break; } } } /** * Sets up state related to camera that is needed before opening a {@link CameraDevice}. */ private boolean setUpCameraOutputs() { Activity activity = getActivity(); CameraManager manager = (CameraManager) activity.getSystemService(Context.CAMERA_SERVICE); if (manager == null) { ErrorDialog.buildErrorDialog("This device doesn't support Camera2 API.").show(getFragmentManager(), "dialog"); return false; } try { // Find a CameraDevice that supports RAW captures, and configure state. for (String cameraId : manager.getCameraIdList()) { CameraCharacteristics characteristics = manager.getCameraCharacteristics(cameraId); Log.d(TAG, "---characteristics = " + characteristics); // We only use a camera that supports RAW in this sample. if (!contains(characteristics.get(CameraCharacteristics.REQUEST_AVAILABLE_CAPABILITIES), CameraCharacteristics.REQUEST_AVAILABLE_CAPABILITIES_RAW)) { Log.d(TAG, "-1--characteristics continue"); continue; } Log.d(TAG, "-1--characteristics = " + characteristics); StreamConfigurationMap map = characteristics .get(CameraCharacteristics.SCALER_STREAM_CONFIGURATION_MAP); // For still image captures, we use the largest available size. Size largestJpeg = Collections.max(Arrays.asList(map.getOutputSizes(ImageFormat.JPEG)), new CompareSizesByArea()); Size largestRaw = Collections.max(Arrays.asList(map.getOutputSizes(ImageFormat.RAW_SENSOR)), new CompareSizesByArea()); synchronized (mCameraStateLock) { // Set up ImageReaders for JPEG and RAW outputs. Place these in a reference // counted wrapper to ensure they are only closed when all background tasks // using them are finished. if (mJpegImageReader == null || mJpegImageReader.getAndRetain() == null) { mJpegImageReader = new RefCountedAutoCloseable<>(ImageReader.newInstance( largestJpeg.getWidth(), largestJpeg.getHeight(), ImageFormat.JPEG, /*maxImages*/5)); } mJpegImageReader.get().setOnImageAvailableListener(mOnJpegImageAvailableListener, mBackgroundHandler); if (mRawImageReader == null || mRawImageReader.getAndRetain() == null) { mRawImageReader = new RefCountedAutoCloseable<>( ImageReader.newInstance(largestRaw.getWidth(), largestRaw.getHeight(), ImageFormat.RAW_SENSOR, /*maxImages*/ 5)); } mRawImageReader.get().setOnImageAvailableListener(mOnRawImageAvailableListener, mBackgroundHandler); mCharacteristics = characteristics; mCameraId = cameraId; } return true; } } catch (CameraAccessException e) { e.printStackTrace(); } // If we found no suitable cameras for capturing RAW, warn the user. ErrorDialog.buildErrorDialog("This device doesn't support capturing RAW photos").show(getFragmentManager(), "dialog"); return false; } /** * Opens the camera specified by {@link #mCameraId}. */ @SuppressWarnings("MissingPermission") private void openCamera() { if (!setUpCameraOutputs()) { return; } if (!hasAllPermissionsGranted()) { requestCameraPermissions(); return; } Activity activity = getActivity(); CameraManager manager = (CameraManager) activity.getSystemService(Context.CAMERA_SERVICE); try { // Wait for any previously running session to finish. if (!mCameraOpenCloseLock.tryAcquire(2500, TimeUnit.MILLISECONDS)) { throw new RuntimeException("Time out waiting to lock camera opening."); } String cameraId; Handler backgroundHandler; synchronized (mCameraStateLock) { cameraId = mCameraId; backgroundHandler = mBackgroundHandler; } // Attempt to open the camera. mStateCallback will be called on the background handler's // thread when this succeeds or fails. manager.openCamera(cameraId, mStateCallback, backgroundHandler); } catch (CameraAccessException e) { e.printStackTrace(); } catch (InterruptedException e) { throw new RuntimeException("Interrupted while trying to lock camera opening.", e); } } /** * Requests permissions necessary to use camera and save pictures. */ private void requestCameraPermissions() { if (shouldShowRationale()) { PermissionConfirmationDialog.newInstance().show(getChildFragmentManager(), "dialog"); } else { requestPermissions(new String[] { Manifest.permission.CAMERA }, REQUEST_CAMERA_PERMISSION); } } /** * Tells whether all the necessary permissions are granted to this app. * * @return True if all the required permissions are granted. */ private boolean hasAllPermissionsGranted() { for (String permission : CAMERA_PERMISSIONS) { if (ActivityCompat.checkSelfPermission(getActivity(), permission) != PackageManager.PERMISSION_GRANTED) { return false; } } return true; } /** * Gets whether you should show UI with rationale for requesting the permissions. * * @return True if the UI should be shown. */ private boolean shouldShowRationale() { for (String permission : CAMERA_PERMISSIONS) { if (shouldShowRequestPermissionRationale(Manifest.permission.CAMERA)) { return true; } } return false; } /** * Shows that this app really needs the permission and finishes the app. */ private void showMissingPermissionError() { Activity activity = getActivity(); if (activity != null) { Toast.makeText(activity, R.string.request_permission, Toast.LENGTH_SHORT).show(); activity.finish(); } } /** * Closes the current {@link CameraDevice}. */ private void closeCamera() { try { mCameraOpenCloseLock.acquire(); synchronized (mCameraStateLock) { // Reset state and clean up resources used by the camera. // Note: After calling this, the ImageReaders will be closed after any background // tasks saving Images from these readers have been completed. mPendingUserCaptures = 0; mState = STATE_CLOSED; if (null != mCaptureSession) { mCaptureSession.close(); mCaptureSession = null; } if (null != mCameraDevice) { mCameraDevice.close(); mCameraDevice = null; } if (null != mJpegImageReader) { mJpegImageReader.close(); mJpegImageReader = null; } if (null != mRawImageReader) { mRawImageReader.close(); mRawImageReader = null; } } } catch (InterruptedException e) { throw new RuntimeException("Interrupted while trying to lock camera closing.", e); } finally { mCameraOpenCloseLock.release(); } } /** * Starts a background thread and its {@link Handler}. */ private void startBackgroundThread() { mBackgroundThread = new HandlerThread("CameraBackground"); mBackgroundThread.start(); synchronized (mCameraStateLock) { mBackgroundHandler = new Handler(mBackgroundThread.getLooper()); } } /** * Stops the background thread and its {@link Handler}. */ private void stopBackgroundThread() { mBackgroundThread.quitSafely(); try { mBackgroundThread.join(); mBackgroundThread = null; synchronized (mCameraStateLock) { mBackgroundHandler = null; } } catch (InterruptedException e) { e.printStackTrace(); } } /** * Creates a new {@link CameraCaptureSession} for camera preview. * <p/> * Call this only with {@link #mCameraStateLock} held. */ private void createCameraPreviewSessionLocked() { try { SurfaceTexture texture = mTextureView.getSurfaceTexture(); // We configure the size of default buffer to be the size of camera preview we want. texture.setDefaultBufferSize(mPreviewSize.getWidth(), mPreviewSize.getHeight()); // This is the output Surface we need to start preview. Surface surface = new Surface(texture); // We set up a CaptureRequest.Builder with the output Surface. mPreviewRequestBuilder = mCameraDevice.createCaptureRequest(CameraDevice.TEMPLATE_PREVIEW); mPreviewRequestBuilder.addTarget(surface); // Here, we create a CameraCaptureSession for camera preview. mCameraDevice.createCaptureSession( Arrays.asList(surface, mJpegImageReader.get().getSurface(), mRawImageReader.get().getSurface()), new CameraCaptureSession.StateCallback() { @Override public void onConfigured(CameraCaptureSession cameraCaptureSession) { synchronized (mCameraStateLock) { // The camera is already closed if (null == mCameraDevice) { return; } try { setup3AControlsLocked(mPreviewRequestBuilder); // Finally, we start displaying the camera preview. cameraCaptureSession.setRepeatingRequest(mPreviewRequestBuilder.build(), mPreCaptureCallback, mBackgroundHandler); mState = STATE_PREVIEW; } catch (CameraAccessException | IllegalStateException e) { e.printStackTrace(); return; } // When the session is ready, we start displaying the preview. mCaptureSession = cameraCaptureSession; } } @Override public void onConfigureFailed(CameraCaptureSession cameraCaptureSession) { showToast("Failed to configure camera."); } }, mBackgroundHandler); } catch (CameraAccessException e) { e.printStackTrace(); } } /** * Configure the given {@link CaptureRequest.Builder} to use auto-focus, auto-exposure, and * auto-white-balance controls if available. * <p/> * Call this only with {@link #mCameraStateLock} held. * * @param builder the builder to configure. */ private void setup3AControlsLocked(CaptureRequest.Builder builder) { // Enable auto-magical 3A run by camera device builder.set(CaptureRequest.CONTROL_MODE, CaptureRequest.CONTROL_MODE_AUTO); Float minFocusDist = mCharacteristics.get(CameraCharacteristics.LENS_INFO_MINIMUM_FOCUS_DISTANCE); // If MINIMUM_FOCUS_DISTANCE is 0, lens is fixed-focus and we need to skip the AF run. mNoAFRun = (minFocusDist == null || minFocusDist == 0); if (!mNoAFRun) { // If there is a "continuous picture" mode available, use it, otherwise default to AUTO. if (contains(mCharacteristics.get(CameraCharacteristics.CONTROL_AF_AVAILABLE_MODES), CaptureRequest.CONTROL_AF_MODE_CONTINUOUS_PICTURE)) { builder.set(CaptureRequest.CONTROL_AF_MODE, CaptureRequest.CONTROL_AF_MODE_CONTINUOUS_PICTURE); } else { builder.set(CaptureRequest.CONTROL_AF_MODE, CaptureRequest.CONTROL_AF_MODE_AUTO); } } // If there is an auto-magical flash control mode available, use it, otherwise default to // the "on" mode, which is guaranteed to always be available. if (contains(mCharacteristics.get(CameraCharacteristics.CONTROL_AE_AVAILABLE_MODES), CaptureRequest.CONTROL_AE_MODE_ON_AUTO_FLASH)) { builder.set(CaptureRequest.CONTROL_AE_MODE, CaptureRequest.CONTROL_AE_MODE_ON_AUTO_FLASH); } else { builder.set(CaptureRequest.CONTROL_AE_MODE, CaptureRequest.CONTROL_AE_MODE_ON); } // If there is an auto-magical white balance control mode available, use it. if (contains(mCharacteristics.get(CameraCharacteristics.CONTROL_AWB_AVAILABLE_MODES), CaptureRequest.CONTROL_AWB_MODE_AUTO)) { // Allow AWB to run auto-magically if this device supports this builder.set(CaptureRequest.CONTROL_AWB_MODE, CaptureRequest.CONTROL_AWB_MODE_AUTO); } } /** * Configure the necessary {@link android.graphics.Matrix} transformation to `mTextureView`, * and start/restart the preview capture session if necessary. * <p/> * This method should be called after the camera state has been initialized in * setUpCameraOutputs. * * @param viewWidth The width of `mTextureView` * @param viewHeight The height of `mTextureView` */ private void configureTransform(int viewWidth, int viewHeight) { Activity activity = getActivity(); synchronized (mCameraStateLock) { if (null == mTextureView || null == activity) { return; } StreamConfigurationMap map = mCharacteristics .get(CameraCharacteristics.SCALER_STREAM_CONFIGURATION_MAP); // For still image captures, we always use the largest available size. Size largestJpeg = Collections.max(Arrays.asList(map.getOutputSizes(ImageFormat.JPEG)), new CompareSizesByArea()); // Find the rotation of the device relative to the native device orientation. int deviceRotation = activity.getWindowManager().getDefaultDisplay().getRotation(); Point displaySize = new Point(); activity.getWindowManager().getDefaultDisplay().getSize(displaySize); // Find the rotation of the device relative to the camera sensor's orientation. int totalRotation = sensorToDeviceRotation(mCharacteristics, deviceRotation); // Swap the view dimensions for calculation as needed if they are rotated relative to // the sensor. boolean swappedDimensions = totalRotation == 90 || totalRotation == 270; int rotatedViewWidth = viewWidth; int rotatedViewHeight = viewHeight; int maxPreviewWidth = displaySize.x; int maxPreviewHeight = displaySize.y; if (swappedDimensions) { rotatedViewWidth = viewHeight; rotatedViewHeight = viewWidth; maxPreviewWidth = displaySize.y; maxPreviewHeight = displaySize.x; } // Preview should not be larger than display size and 1080p. if (maxPreviewWidth > MAX_PREVIEW_WIDTH) { maxPreviewWidth = MAX_PREVIEW_WIDTH; } if (maxPreviewHeight > MAX_PREVIEW_HEIGHT) { maxPreviewHeight = MAX_PREVIEW_HEIGHT; } // Find the best preview size for these view dimensions and configured JPEG size. Size previewSize = chooseOptimalSize(map.getOutputSizes(SurfaceTexture.class), rotatedViewWidth, rotatedViewHeight, maxPreviewWidth, maxPreviewHeight, largestJpeg); if (swappedDimensions) { mTextureView.setAspectRatio(previewSize.getHeight(), previewSize.getWidth()); } else { mTextureView.setAspectRatio(previewSize.getWidth(), previewSize.getHeight()); } // Find rotation of device in degrees (reverse device orientation for front-facing // cameras). int rotation = (mCharacteristics .get(CameraCharacteristics.LENS_FACING) == CameraCharacteristics.LENS_FACING_FRONT) ? (360 + ORIENTATIONS.get(deviceRotation)) % 360 : (360 - ORIENTATIONS.get(deviceRotation)) % 360; Matrix matrix = new Matrix(); RectF viewRect = new RectF(0, 0, viewWidth, viewHeight); RectF bufferRect = new RectF(0, 0, previewSize.getHeight(), previewSize.getWidth()); float centerX = viewRect.centerX(); float centerY = viewRect.centerY(); // Initially, output stream images from the Camera2 API will be rotated to the native // device orientation from the sensor's orientation, and the TextureView will default to // scaling these buffers to fill it's view bounds. If the aspect ratios and relative // orientations are correct, this is fine. // // However, if the device orientation has been rotated relative to its native // orientation so that the TextureView's dimensions are swapped relative to the // native device orientation, we must do the following to ensure the output stream // images are not incorrectly scaled by the TextureView: // - Undo the scale-to-fill from the output buffer's dimensions (i.e. its dimensions // in the native device orientation) to the TextureView's dimension. // - Apply a scale-to-fill from the output buffer's rotated dimensions // (i.e. its dimensions in the current device orientation) to the TextureView's // dimensions. // - Apply the rotation from the native device orientation to the current device // rotation. if (Surface.ROTATION_90 == deviceRotation || Surface.ROTATION_270 == deviceRotation) { bufferRect.offset(centerX - bufferRect.centerX(), centerY - bufferRect.centerY()); matrix.setRectToRect(viewRect, bufferRect, Matrix.ScaleToFit.FILL); float scale = Math.max((float) viewHeight / previewSize.getHeight(), (float) viewWidth / previewSize.getWidth()); matrix.postScale(scale, scale, centerX, centerY); } matrix.postRotate(rotation, centerX, centerY); mTextureView.setTransform(matrix); // Start or restart the active capture session if the preview was initialized or // if its aspect ratio changed significantly. if (mPreviewSize == null || !checkAspectsEqual(previewSize, mPreviewSize)) { mPreviewSize = previewSize; if (mState != STATE_CLOSED) { createCameraPreviewSessionLocked(); } } } } /** * Initiate a still image capture. * <p/> * This function sends a capture request that initiates a pre-capture sequence in our state * machine that waits for auto-focus to finish, ending in a "locked" state where the lens is no * longer moving, waits for auto-exposure to choose a good exposure value, and waits for * auto-white-balance to converge. */ private void takePicture() { synchronized (mCameraStateLock) { mPendingUserCaptures++; // If we already triggered a pre-capture sequence, or are in a state where we cannot // do this, return immediately. if (mState != STATE_PREVIEW) { return; } try { // Trigger an auto-focus run if camera is capable. If the camera is already focused, // this should do nothing. if (!mNoAFRun) { mPreviewRequestBuilder.set(CaptureRequest.CONTROL_AF_TRIGGER, CameraMetadata.CONTROL_AF_TRIGGER_START); } // If this is not a legacy device, we can also trigger an auto-exposure metering // run. if (!isLegacyLocked()) { // Tell the camera to lock focus. mPreviewRequestBuilder.set(CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER, CameraMetadata.CONTROL_AE_PRECAPTURE_TRIGGER_START); } // Update state machine to wait for auto-focus, auto-exposure, and // auto-white-balance (aka. "3A") to converge. mState = STATE_WAITING_FOR_3A_CONVERGENCE; // Start a timer for the pre-capture sequence. startTimerLocked(); // Replace the existing repeating request with one with updated 3A triggers. mCaptureSession.capture(mPreviewRequestBuilder.build(), mPreCaptureCallback, mBackgroundHandler); } catch (CameraAccessException e) { e.printStackTrace(); } } } /** * Send a capture request to the camera device that initiates a capture targeting the JPEG and * RAW outputs. * <p/> * Call this only with {@link #mCameraStateLock} held. */ private void captureStillPictureLocked() { try { final Activity activity = getActivity(); if (null == activity || null == mCameraDevice) { return; } // This is the CaptureRequest.Builder that we use to take a picture. final CaptureRequest.Builder captureBuilder = mCameraDevice .createCaptureRequest(CameraDevice.TEMPLATE_STILL_CAPTURE); captureBuilder.addTarget(mJpegImageReader.get().getSurface()); captureBuilder.addTarget(mRawImageReader.get().getSurface()); // Use the same AE and AF modes as the preview. setup3AControlsLocked(captureBuilder); // Set orientation. int rotation = activity.getWindowManager().getDefaultDisplay().getRotation(); captureBuilder.set(CaptureRequest.JPEG_ORIENTATION, sensorToDeviceRotation(mCharacteristics, rotation)); // Set request tag to easily track results in callbacks. captureBuilder.setTag(mRequestCounter.getAndIncrement()); CaptureRequest request = captureBuilder.build(); // Create an ImageSaverBuilder in which to collect results, and add it to the queue // of active requests. ImageSaver.ImageSaverBuilder jpegBuilder = new ImageSaver.ImageSaverBuilder(activity) .setCharacteristics(mCharacteristics); ImageSaver.ImageSaverBuilder rawBuilder = new ImageSaver.ImageSaverBuilder(activity) .setCharacteristics(mCharacteristics); mJpegResultQueue.put((int) request.getTag(), jpegBuilder); mRawResultQueue.put((int) request.getTag(), rawBuilder); mCaptureSession.capture(request, mCaptureCallback, mBackgroundHandler); } catch (CameraAccessException e) { e.printStackTrace(); } } /** * Called after a RAW/JPEG capture has completed; resets the AF trigger state for the * pre-capture sequence. * <p/> * Call this only with {@link #mCameraStateLock} held. */ private void finishedCaptureLocked() { try { // Reset the auto-focus trigger in case AF didn't run quickly enough. if (!mNoAFRun) { mPreviewRequestBuilder.set(CaptureRequest.CONTROL_AF_TRIGGER, CameraMetadata.CONTROL_AF_TRIGGER_CANCEL); mCaptureSession.capture(mPreviewRequestBuilder.build(), mPreCaptureCallback, mBackgroundHandler); mPreviewRequestBuilder.set(CaptureRequest.CONTROL_AF_TRIGGER, CameraMetadata.CONTROL_AF_TRIGGER_IDLE); } } catch (CameraAccessException e) { e.printStackTrace(); } } /** * Retrieve the next {@link Image} from a reference counted {@link ImageReader}, retaining * that {@link ImageReader} until that {@link Image} is no longer in use, and set this * {@link Image} as the result for the next request in the queue of pending requests. If * all necessary information is available, begin saving the image to a file in a background * thread. * * @param pendingQueue the currently active requests. * @param reader a reference counted wrapper containing an {@link ImageReader} from which * to acquire an image. */ private void dequeueAndSaveImage(TreeMap<Integer, ImageSaver.ImageSaverBuilder> pendingQueue, RefCountedAutoCloseable<ImageReader> reader) { synchronized (mCameraStateLock) { Map.Entry<Integer, ImageSaver.ImageSaverBuilder> entry = pendingQueue.firstEntry(); ImageSaver.ImageSaverBuilder builder = entry.getValue(); // Increment reference count to prevent ImageReader from being closed while we // are saving its Images in a background thread (otherwise their resources may // be freed while we are writing to a file). if (reader == null || reader.getAndRetain() == null) { Log.e(TAG, "Paused the activity before we could save the image," + " ImageReader already closed."); pendingQueue.remove(entry.getKey()); return; } Image image; try { image = reader.get().acquireNextImage(); } catch (IllegalStateException e) { Log.e(TAG, "Too many images queued for saving, dropping image for request: " + entry.getKey()); pendingQueue.remove(entry.getKey()); return; } builder.setRefCountedReader(reader).setImage(image); handleCompletionLocked(entry.getKey(), builder, pendingQueue); } } /** * Runnable that saves an {@link Image} into the specified {@link File}, and updates * {@link android.provider.MediaStore} to include the resulting file. * <p/> * This can be constructed through an {@link ImageSaverBuilder} as the necessary image and * result information becomes available. */ private static class ImageSaver implements Runnable { /** * The image to save. */ private final Image mImage; /** * The file we save the image into. */ private final File mFile; /** * The CaptureResult for this image capture. */ private final CaptureResult mCaptureResult; /** * The CameraCharacteristics for this camera device. */ private final CameraCharacteristics mCharacteristics; /** * The Context to use when updating MediaStore with the saved images. */ private final Context mContext; /** * A reference counted wrapper for the ImageReader that owns the given image. */ private final RefCountedAutoCloseable<ImageReader> mReader; private ImageSaver(Image image, File file, CaptureResult result, CameraCharacteristics characteristics, Context context, RefCountedAutoCloseable<ImageReader> reader) { mImage = image; mFile = file; mCaptureResult = result; mCharacteristics = characteristics; mContext = context; mReader = reader; } @Override public void run() { boolean success = false; int format = mImage.getFormat(); switch (format) { case ImageFormat.JPEG: { ByteBuffer buffer = mImage.getPlanes()[0].getBuffer(); byte[] bytes = new byte[buffer.remaining()]; buffer.get(bytes); FileOutputStream output = null; try { output = new FileOutputStream(mFile); output.write(bytes); success = true; } catch (IOException e) { e.printStackTrace(); } finally { mImage.close(); closeOutput(output); } break; } case ImageFormat.RAW_SENSOR: { DngCreator dngCreator = new DngCreator(mCharacteristics, mCaptureResult); FileOutputStream output = null; try { output = new FileOutputStream(mFile); dngCreator.writeImage(output, mImage); success = true; } catch (IOException e) { e.printStackTrace(); } finally { mImage.close(); closeOutput(output); } break; } default: { Log.e(TAG, "Cannot save image, unexpected image format:" + format); break; } } // Decrement reference count to allow ImageReader to be closed to free up resources. mReader.close(); // If saving the file succeeded, update MediaStore. if (success) { MediaScannerConnection.scanFile(mContext, new String[] { mFile.getPath() }, /*mimeTypes*/null, new MediaScannerConnection.MediaScannerConnectionClient() { @Override public void onMediaScannerConnected() { // Do nothing } @Override public void onScanCompleted(String path, Uri uri) { Log.i(TAG, "Scanned " + path + ":"); Log.i(TAG, "-> uri=" + uri); } }); } } /** * Builder class for constructing {@link ImageSaver}s. * <p/> * This class is thread safe. */ public static class ImageSaverBuilder { private Image mImage; private File mFile; private CaptureResult mCaptureResult; private CameraCharacteristics mCharacteristics; private Context mContext; private RefCountedAutoCloseable<ImageReader> mReader; /** * Construct a new ImageSaverBuilder using the given {@link Context}. * * @param context a {@link Context} to for accessing the * {@link android.provider.MediaStore}. */ public ImageSaverBuilder(final Context context) { mContext = context; } public synchronized ImageSaverBuilder setRefCountedReader(RefCountedAutoCloseable<ImageReader> reader) { if (reader == null) throw new NullPointerException(); mReader = reader; return this; } public synchronized ImageSaverBuilder setImage(final Image image) { if (image == null) throw new NullPointerException(); mImage = image; return this; } public synchronized ImageSaverBuilder setFile(final File file) { if (file == null) throw new NullPointerException(); mFile = file; return this; } public synchronized ImageSaverBuilder setResult(final CaptureResult result) { if (result == null) throw new NullPointerException(); mCaptureResult = result; return this; } public synchronized ImageSaverBuilder setCharacteristics(final CameraCharacteristics characteristics) { if (characteristics == null) throw new NullPointerException(); mCharacteristics = characteristics; return this; } public synchronized ImageSaver buildIfComplete() { if (!isComplete()) { return null; } return new ImageSaver(mImage, mFile, mCaptureResult, mCharacteristics, mContext, mReader); } public synchronized String getSaveLocation() { return (mFile == null) ? "Unknown" : mFile.toString(); } private boolean isComplete() { return mImage != null && mFile != null && mCaptureResult != null && mCharacteristics != null; } } } // Utility classes and methods: // ********************************************************************************************* /** * Comparator based on area of the given {@link Size} objects. */ static class CompareSizesByArea implements Comparator<Size> { @Override public int compare(Size lhs, Size rhs) { // We cast here to ensure the multiplications won't overflow return Long.signum((long) lhs.getWidth() * lhs.getHeight() - (long) rhs.getWidth() * rhs.getHeight()); } } /** * A dialog fragment for displaying non-recoverable errors; this {@ling Activity} will be * finished once the dialog has been acknowledged by the user. */ public static class ErrorDialog extends DialogFragment { private String mErrorMessage; public ErrorDialog() { mErrorMessage = "Unknown error occurred!"; } // Build a dialog with a custom message (Fragments require default constructor). public static ErrorDialog buildErrorDialog(String errorMessage) { ErrorDialog dialog = new ErrorDialog(); dialog.mErrorMessage = errorMessage; return dialog; } @Override public Dialog onCreateDialog(Bundle savedInstanceState) { final Activity activity = getActivity(); return new AlertDialog.Builder(activity).setMessage(mErrorMessage) .setPositiveButton(android.R.string.ok, new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialogInterface, int i) { activity.finish(); } }).create(); } } /** * A wrapper for an {@link AutoCloseable} object that implements reference counting to allow * for resource management. */ public static class RefCountedAutoCloseable<T extends AutoCloseable> implements AutoCloseable { private T mObject; private long mRefCount = 0; /** * Wrap the given object. * * @param object an object to wrap. */ public RefCountedAutoCloseable(T object) { if (object == null) throw new NullPointerException(); mObject = object; } /** * Increment the reference count and return the wrapped object. * * @return the wrapped object, or null if the object has been released. */ public synchronized T getAndRetain() { if (mRefCount < 0) { return null; } mRefCount++; return mObject; } /** * Return the wrapped object. * * @return the wrapped object, or null if the object has been released. */ public synchronized T get() { return mObject; } /** * Decrement the reference count and release the wrapped object if there are no other * users retaining this object. */ @Override public synchronized void close() { if (mRefCount >= 0) { mRefCount--; if (mRefCount < 0) { try { mObject.close(); } catch (Exception e) { throw new RuntimeException(e); } finally { mObject = null; } } } } } /** * Given {@code choices} of {@code Size}s supported by a camera, choose the smallest one that * is at least as large as the respective texture view size, and that is at most as large as the * respective max size, and whose aspect ratio matches with the specified value. If such size * doesn't exist, choose the largest one that is at most as large as the respective max size, * and whose aspect ratio matches with the specified value. * * @param choices The list of sizes that the camera supports for the intended output * class * @param textureViewWidth The width of the texture view relative to sensor coordinate * @param textureViewHeight The height of the texture view relative to sensor coordinate * @param maxWidth The maximum width that can be chosen * @param maxHeight The maximum height that can be chosen * @param aspectRatio The aspect ratio * @return The optimal {@code Size}, or an arbitrary one if none were big enough */ private static Size chooseOptimalSize(Size[] choices, int textureViewWidth, int textureViewHeight, int maxWidth, int maxHeight, Size aspectRatio) { // Collect the supported resolutions that are at least as big as the preview Surface List<Size> bigEnough = new ArrayList<>(); // Collect the supported resolutions that are smaller than the preview Surface List<Size> notBigEnough = new ArrayList<>(); int w = aspectRatio.getWidth(); int h = aspectRatio.getHeight(); for (Size option : choices) { if (option.getWidth() <= maxWidth && option.getHeight() <= maxHeight && option.getHeight() == option.getWidth() * h / w) { if (option.getWidth() >= textureViewWidth && option.getHeight() >= textureViewHeight) { bigEnough.add(option); } else { notBigEnough.add(option); } } } // Pick the smallest of those big enough. If there is no one big enough, pick the // largest of those not big enough. if (bigEnough.size() > 0) { return Collections.min(bigEnough, new CompareSizesByArea()); } else if (notBigEnough.size() > 0) { return Collections.max(notBigEnough, new CompareSizesByArea()); } else { Log.e(TAG, "Couldn't find any suitable preview size"); return choices[0]; } } /** * Generate a string containing a formatted timestamp with the current date and time. * * @return a {@link String} representing a time. */ private static String generateTimestamp() { SimpleDateFormat sdf = new SimpleDateFormat("yyyy_MM_dd_HH_mm_ss_SSS", Locale.US); return sdf.format(new Date()); } /** * Cleanup the given {@link OutputStream}. * * @param outputStream the stream to close. */ private static void closeOutput(OutputStream outputStream) { if (null != outputStream) { try { outputStream.close(); } catch (IOException e) { e.printStackTrace(); } } } /** * Return true if the given array contains the given integer. * * @param modes array to check. * @param mode integer to get for. * @return true if the array contains the given integer, otherwise false. */ private static boolean contains(int[] modes, int mode) { if (modes == null) { return false; } for (int i : modes) { if (i == mode) { return true; } } return false; } /** * Return true if the two given {@link Size}s have the same aspect ratio. * * @param a first {@link Size} to compare. * @param b second {@link Size} to compare. * @return true if the sizes have the same aspect ratio, otherwise false. */ private static boolean checkAspectsEqual(Size a, Size b) { double aAspect = a.getWidth() / (double) a.getHeight(); double bAspect = b.getWidth() / (double) b.getHeight(); return Math.abs(aAspect - bAspect) <= ASPECT_RATIO_TOLERANCE; } /** * Rotation need to transform from the camera sensor orientation to the device's current * orientation. * * @param c the {@link CameraCharacteristics} to query for the camera sensor * orientation. * @param deviceOrientation the current device orientation relative to the native device * orientation. * @return the total rotation from the sensor orientation to the current device orientation. */ private static int sensorToDeviceRotation(CameraCharacteristics c, int deviceOrientation) { int sensorOrientation = c.get(CameraCharacteristics.SENSOR_ORIENTATION); // Get device orientation in degrees deviceOrientation = ORIENTATIONS.get(deviceOrientation); // Reverse device orientation for front-facing cameras if (c.get(CameraCharacteristics.LENS_FACING) == CameraCharacteristics.LENS_FACING_FRONT) { deviceOrientation = -deviceOrientation; } // Calculate desired JPEG orientation relative to camera orientation to make // the image upright relative to the device orientation return (sensorOrientation - deviceOrientation + 360) % 360; } /** * Shows a {@link Toast} on the UI thread. * * @param text The message to show. */ private void showToast(String text) { // We show a Toast by sending request message to mMessageHandler. This makes sure that the // Toast is shown on the UI thread. Message message = Message.obtain(); message.obj = text; mMessageHandler.sendMessage(message); } /** * If the given request has been completed, remove it from the queue of active requests and * send an {@link ImageSaver} with the results from this request to a background thread to * save a file. * <p/> * Call this only with {@link #mCameraStateLock} held. * * @param requestId the ID of the {@link CaptureRequest} to handle. * @param builder the {@link ImageSaver.ImageSaverBuilder} for this request. * @param queue the queue to remove this request from, if completed. */ private void handleCompletionLocked(int requestId, ImageSaver.ImageSaverBuilder builder, TreeMap<Integer, ImageSaver.ImageSaverBuilder> queue) { if (builder == null) return; ImageSaver saver = builder.buildIfComplete(); if (saver != null) { queue.remove(requestId); AsyncTask.THREAD_POOL_EXECUTOR.execute(saver); } } /** * Check if we are using a device that only supports the LEGACY hardware level. * <p/> * Call this only with {@link #mCameraStateLock} held. * * @return true if this is a legacy device. */ private boolean isLegacyLocked() { return mCharacteristics.get( CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL) == CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY; } /** * Start the timer for the pre-capture sequence. * <p/> * Call this only with {@link #mCameraStateLock} held. */ private void startTimerLocked() { mCaptureTimer = SystemClock.elapsedRealtime(); } /** * Check if the timer for the pre-capture sequence has been hit. * <p/> * Call this only with {@link #mCameraStateLock} held. * * @return true if the timeout occurred. */ private boolean hitTimeoutLocked() { return (SystemClock.elapsedRealtime() - mCaptureTimer) > PRECAPTURE_TIMEOUT_MS; } /** * A dialog that explains about the necessary permissions. */ public static class PermissionConfirmationDialog extends DialogFragment { public static PermissionConfirmationDialog newInstance() { return new PermissionConfirmationDialog(); } @Override public Dialog onCreateDialog(Bundle savedInstanceState) { final Fragment parent = getParentFragment(); return new AlertDialog.Builder(getActivity()).setMessage(R.string.request_permission) .setPositiveButton(android.R.string.ok, new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { requestPermissions(new String[] { Manifest.permission.CAMERA }, REQUEST_CAMERA_PERMISSION); } }).setNegativeButton(android.R.string.cancel, new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { getActivity().finish(); } }).create(); } } }