1. Quartz triggers do not fire job after restart forums.terracotta.orgdclark neo Joined: 06/23/2011 08:42:21 Messages: 1 Offline We've been using quartz for years and have had very few issues with it. But recently we've seen some strange things happen. The first is that we have a bug in our application that causes an OutOfMemory error. When this happens we restart the web server and everything starts normally except that a ... |
2. How to store each repetition of trigger forums.terracotta.orgHi ! I have working Quartz job an have successfully configured Oracle Job Store. I would expect, that QRTZ_FIRED_TRIGGERS table holds the history of all fired triggers - whenever execute is called one record should be inserted in this table. Am I wrong ? If I am wrong, how can I configure the Quartz to store each repetition of particular trigger? ... |
3. Trigger BLOCKED forums.terracotta.orgQuartz 1.6.1. We have a crontrigger, statefuljob in a cluster. Lately we had such situation: - one of the cluster node had a coredump; - the state of the trigger in QRTZ_TRIGGERS was BLOCKED; - FIRED_TRIGGERS was empty; - other node didn't take over executing the jobs. Why? I've looked in the code, and I don't see recovery from BLOCKED state ... |
4. Adding exclusion for existing trigger forums.terracotta.orgI want to exclude a particular date/time from an existing daily schedule. I'm attempting to do so with a CronCalendar and a call to reschedule (see below). After adding the calender and updating the schedule, when I call getNextFireTime, the excluded time is still appearing as a fire time. What am I doing wrong? String cronExpression = getCronExpressionFromDate(futureScheduledOccurrence.getRunDate()); CronCalendar cal = ... |
5. Simple Trigger set to fire only once calling job multiple times forums.terracotta.orgHello, I am new to quartz and inherited an application that uses quartz from a developer who left the firm and was the only resource that knew quartz. Here is our setup. We have Quartz runniing on 6 Web Logic 10 web servers connected to an Oracle data source in two different data centers. We do have data replication between data ... |
6. TRIGGER_STATE was stucked in "ACQUIRED" and didn't changed forums.terracotta.orgHi, I use DBJobStore with MySQL in my webapp. Three modules use the same quartz. Some questions happened. When I insert a new job into database and make the job executed immediately, the "TRIGGER_STATE" was stucked in "ACQUIRED" and the "qrtz_fired_triggers" table was no record. What problems call this? I use MySQL 5.5, and Quartz 1.8.5 Following is property file org.quartz.scheduler.instanceName ... |
7. Remaining count of a trigger forums.terracotta.orgThere are a few options, some of which depend on the type of trigger. One way to do it for any type is to us TriggerUtils.computeFireTimes() method and give a very large number for the number of fire times to compute. The actual size of the returned list of fire times will be the number of remaining fires. Of course if ... |
8. Trigger Priority not working forums.terracotta.orgSo I have the following code: jobName="test1"; jobClass=RunMeJob.class; cronExpression = "0 0/1 * * * ?"; ct = new CronTrigger("cronTrigger1", "group1", cronExpression); ct.setPriority(1); JobDetail jobDetail1 = new JobDetail(jobName, jobClass); scheduler.scheduleJob(jobDetail1, ct); jobName="test2"; jobClass=RunMeJob2.class; cronExpression = "0 0/1 * * * ?"; ct = new CronTrigger("cronTrigger2", "group1", cronExpression); ct.setPriority(3); JobDetail jobDetail2 = new JobDetail(jobName, jobClass); scheduler.scheduleJob(jobDetail2, ct); jobName="test3"; jobClass=RunMeJob3.class; cronExpression = "0 ... |
9. Trigger missfire not working forums.terracotta.orgSo I have 4 jobs and 4 triggers all starting in the same time. My ThreadCount is 4 and only 3 jobs are started first, when one job is finished the last one starts. I have implemented a TriggerListener and I want to see when a job misfires. The problem is the method is never called, but from what I understand ... |
10. How to find if Quartz trigger doesn't fire on schedule? forums.terracotta.org |
11. How to delete fired triggers? forums.terracotta.orgHi, I have in my code a job that execute 4 times each hour. My application have a button that allow to cancel all the tasks (jobs). I delete this job in my code doing this: scheduler.pauseJob(JobName, groupName); scheduler.unscheduleJob(JobName, groupName); scheduler.deleteJob(JobName, groupName); But I have a problem... My job works about 10 minutes doing operations to my BD. The method deleteJobs ... |
12. Use of simprop_triggers table forums.terracotta.orgCan someone give an exampe of how the simprop_triggers table is used? that is,what settings do i have to set on simple or cron triggers in order to have values persisted to this table? I just wanted to get an idea of what sort of properties/values might be stored in this table. |
13. Trigger Properties forums.terracotta.org |
14. misfired vs failed triggers recovery query forums.terracotta.orgHi All, I am using quartz-2.1, XML Job file and JobStoreTx. I require clarifications for below questions, 1. How does the misfired trigger key gets identified by scheduler instance? 2. What are the differences between failed and misfired jobs? How shall I recognize those from JobStoreTx ? 3. I would like to know the meaning below logs information, what table or ... |
15. Trigger stuck in BLOCKED state. forums.terracotta.orgWe are using Quartz 1.6.5. We had following situation: One of the database nodes crashed at the time a stateful job was executing or completed to execute. This resulted in following exception: Code: com.ibm.websphere.ce.cm.ObjectClosedException: DSRA9110E: Connection is closed. at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.runtimeXIfNotClosed(WSJdbcConnection.java:2658) at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.setAutoCommit(WSJdbcConnection.java:2742) at org.quartz.impl.jdbcjobstore.AttributeRestoringConnectionInvocationHandler.restoreOriginalAtributes(AttributeRestoringConnectionInvocationHandler.java:134) at org.quartz.impl.jdbcjobstore.JobStoreSupport.cleanupConnection(JobStoreSupport.java:3551) at org.quartz.impl.jdbcjobstore.JobStoreSupport.executeInNonManagedTXLock(JobStoreSupport.java:3774) at org.quartz.impl.jdbcjobstore.JobStoreSupport.executeInNonManagedTXLock(JobStoreSupport.java:3722) at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggeredJobComplete(JobStoreSupport.java:2958) at org.quartz.core.QuartzScheduler.notifyJobStoreJobComplete(QuartzScheduler.java:1727) at org.quartz.core.JobRunShell.run(JobRunShell.java:273) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:651) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:676) at ... |
16. Misfired Triggers firing Days latter forums.terracotta.orgHi all, We have a Production environment with 6 nodes (6 schedulers) and have Quartz configured for cluster. I'm pretty sure all configuration is good as we see scheduler instances checking in every 20 seconds and sometimes a node recovering jobs for another node that failed All that seems to be working fine but our issue is with Misfired jobs. For ... |
17. TriggerBuilder and custom trigger types forums.terracotta.orgI thought there was JavaDoc that discussed that behavior, but it seems not - likely it went missing just before the 2.0 release, when there was some merge problems and some other chunks of javadoc went missing. At any rate, the behavior is the way that it is in order to put forth the pattern of the builders always being in ... |
18. how to use one trigger to achieve this requirement forums.terracotta.orghi, can any one please help me with such requirement: I need my job is triggered immediately at first time and I can not predict when the job will be started at first, after that the job will be triggered every hour. ex: if current time is 9:15AM and I start the job, then the job should be triggered at 9:15AM, ... |
19. question about DailyTimeIntervalTrigger and trigger in general forums.terracotta.orgFirst of all we like the feature day range with interval of new DailyTimeIntervalTrigger very much. But my question is, is there already a possibility to create a trigger with a day range like for DailyTimeIntervalTrigger (e.g. from 8 am to 8 pm every n minutes) not based on specific weekdays but rather every 3 days or on each monday every ... |
20. Is it mandatory to specify the JOB TYPE in trigger?? forums.terracotta.orgHi, I am novice to quartz. I wanna develop .Net application with quartz scheduler and i want my application to get job data information (i.e. Job Name, Job Group, Interval) from my oracle data base (that i've already inserted by myself). In my application while defining simple trigger, I've to specify the job type in parameter alongwith job name and job ... |
21. Quartz 1.8.5 scheduler not triggering forums.terracotta.orgsri1604 journeyman Joined: 06/20/2011 02:24:05 Messages: 11 Offline Hi, We have Quartz 1.8.5 running on Weblogic11g AIX. The web app has about 15 job-trigger pairs and all the triggers are simple triggers, scheduled to run approximately 5 mins on an average. the jobs XML is defined as |