org.orekit.errors.OrekitMessages.java Source code

Java tutorial

Introduction

Here is the source code for org.orekit.errors.OrekitMessages.java

Source

/* Copyright 2002-2015 CS Systmes d'Information
 * Licensed to CS Systmes d'Information (CS) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * CS licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
package org.orekit.errors;

import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.net.URL;
import java.net.URLConnection;
import java.util.Locale;
import java.util.MissingResourceException;
import java.util.PropertyResourceBundle;
import java.util.ResourceBundle;

import org.apache.commons.math3.exception.util.Localizable;

/**
 * Enumeration for localized messages formats.
 * <p>
 * The constants in this enumeration represent the available
 * formats as localized strings. These formats are intended to be
 * localized using simple properties files, using the constant
 * name as the key and the property value as the message format.
 * The source English format is provided in the constants themselves
 * to serve both as a reminder for developers to understand the parameters
 * needed by each format, as a basis for translators to create
 * localized properties files, and as a default format if some
 * translation is missing.
 * </p>
 * @since 2.1
 */
public enum OrekitMessages implements Localizable {

    // CHECKSTYLE: stop JavadocVariable check

    INTERNAL_ERROR("internal error, contact maintenance at {0}"), ALTITUDE_BELOW_ALLOWED_THRESHOLD(
            "altitude ({0} m) is below the {1} m allowed threshold"), TRAJECTORY_INSIDE_BRILLOUIN_SPHERE(
                    "trajectory inside the Brillouin sphere (r = {0})"), ALMOST_EQUATORIAL_ORBIT(
                            "almost equatorial orbit (i = {0} degrees)"), ALMOST_CRITICALLY_INCLINED_ORBIT(
                                    "almost critically inclined orbit (i = {0} degrees)"), UNABLE_TO_COMPUTE_ECKSTEIN_HECHLER_MEAN_PARAMETERS(
                                            "unable to compute Eckstein-Hechler mean parameters after {0} iterations"), NULL_PARENT_FOR_FRAME(
                                                    "null parent for frame {0}"), FRAME_ALREADY_ATTACHED(
                                                            "frame {0} is already attached to frame {1}"), FRAME_NOT_ATTACHED(
                                                                    "frame {0} is not attached to the main frames tree"), FRAME_ANCESTOR_OF_BOTH_FRAMES(
                                                                            "frame {0} is an ancestor of both frames {1} and {2}"), FRAME_ANCESTOR_OF_NEITHER_FRAME(
                                                                                    "frame {0} is an ancestor of neither frame {1} nor {2}"), FRAME_NO_NTH_ANCESTOR(
                                                                                            "frame {0} has depth {1}, it cannot have an ancestor {2} levels above"), UNSUPPORTED_LOCAL_ORBITAL_FRAME(
                                                                                                    "unsupported local orbital frame, supported types: {0} and {1}"), NON_PSEUDO_INERTIAL_FRAME(
                                                                                                            "non pseudo-inertial frame \"{0}\""), DATA_ROOT_DIRECTORY_DOES_NOT_EXIST(
                                                                                                                    "data root directory {0} does not exist"), NOT_A_DIRECTORY(
                                                                                                                            "{0} is not a directory"), NEITHER_DIRECTORY_NOR_ZIP_OR_JAR(
                                                                                                                                    "{0} is neither a directory nor a zip/jar archive file"), UNABLE_TO_FIND_RESOURCE(
                                                                                                                                            "unable to find resource {0} in classpath"), NO_EARTH_ORIENTATION_PARAMETERS_LOADED(
                                                                                                                                                    "no Earth Orientation Parameters loaded"), MISSING_EARTH_ORIENTATION_PARAMETERS_BETWEEN_DATES(
                                                                                                                                                            "missing Earth Orientation Parameters between {0} and {1}"), NOT_A_SUPPORTED_IERS_DATA_FILE(
                                                                                                                                                                    "file {0} is not a supported IERS data file"), INCONSISTENT_DATES_IN_IERS_FILE(
                                                                                                                                                                            "inconsistent dates in IERS file {0}: {1}-{2}-{3} and MJD {4}"), UNEXPECTED_DATA_AFTER_LINE_IN_FILE(
                                                                                                                                                                                    "unexpected data after line {0} in file {1}: {2}"), NON_CHRONOLOGICAL_DATES_IN_FILE(
                                                                                                                                                                                            "non-chronological dates in file {0}, line {1}"), NO_IERS_UTC_TAI_HISTORY_DATA_LOADED(
                                                                                                                                                                                                    "no IERS UTC-TAI history data loaded"), NO_ENTRIES_IN_IERS_UTC_TAI_HISTORY_FILE(
                                                                                                                                                                                                            "no entries found in IERS UTC-TAI history file {0}"), MISSING_SERIE_J_IN_FILE(
                                                                                                                                                                                                                    "missing serie j = {0} in file {1} (line {2})"), CANNOT_PARSE_BOTH_TAU_AND_GAMMA(
                                                                                                                                                                                                                            "cannot parse both \u03c4 and \u03b3 from the same Poissons series file"), UNEXPECTED_END_OF_FILE_AFTER_LINE(
                                                                                                                                                                                                                                    "unexpected end of file {0} (after line {1})"), UNABLE_TO_PARSE_LINE_IN_FILE(
                                                                                                                                                                                                                                            "unable to parse line {0} of file {1}:\n{2}"), UNABLE_TO_FIND_FILE(
                                                                                                                                                                                                                                                    "unable to find file {0}"), SPACECRAFT_MASS_BECOMES_NEGATIVE(
                                                                                                                                                                                                                                                            "spacecraft mass becomes negative: {0} kg"), POSITIVE_FLOW_RATE(
                                                                                                                                                                                                                                                                    "positive flow rate (q: {0})"), NO_GRAVITY_FIELD_DATA_LOADED(
                                                                                                                                                                                                                                                                            "no gravity field data loaded"), GRAVITY_FIELD_NORMALIZATION_UNDERFLOW(
                                                                                                                                                                                                                                                                                    "gravity field normalization underflow for degree {0} and order {1}"), NO_OCEAN_TIDE_DATA_LOADED(
                                                                                                                                                                                                                                                                                            "no ocean tide data loaded"), OCEAN_TIDE_DATA_DEGREE_ORDER_LIMITS(
                                                                                                                                                                                                                                                                                                    "ocean tide data file {0} limited to degree {1} and order {2}"), OCEAN_TIDE_LOAD_DEFORMATION_LIMITS(
                                                                                                                                                                                                                                                                                                            "load deformation coefficients limited to degree {0}, cannot parse degree {1} term from file {2}"), POLAR_TRAJECTORY(
                                                                                                                                                                                                                                                                                                                    "polar trajectory (distance to polar axis: {0})"), UNEXPECTED_FILE_FORMAT_ERROR_FOR_LOADER(
                                                                                                                                                                                                                                                                                                                            "unexpected format error for file {0} with loader {1}"), DUPLICATED_GRAVITY_FIELD_COEFFICIENT_IN_FILE(
                                                                                                                                                                                                                                                                                                                                    "duplicated gravity field coefficient {0}({1}, {2}) in file {3}"), MISSING_GRAVITY_FIELD_COEFFICIENT_IN_FILE(
                                                                                                                                                                                                                                                                                                                                            "missing gravity field coefficient {0}({1}, {2}) in file {3}"), TOO_LARGE_DEGREE_FOR_GRAVITY_FIELD(
                                                                                                                                                                                                                                                                                                                                                    "too large degree (n = {0}, potential maximal degree is {1})"), TOO_LARGE_ORDER_FOR_GRAVITY_FIELD(
                                                                                                                                                                                                                                                                                                                                                            "too large order (m = {0}, potential maximal order is {1})"), SEVERAL_REFERENCE_DATES_IN_GRAVITY_FIELD(
                                                                                                                                                                                                                                                                                                                                                                    "several reference dates ({0} and {1}) found in gravity field file {2}"), NO_TLE_FOR_OBJECT(
                                                                                                                                                                                                                                                                                                                                                                            "no TLE data available for object {0}"), NO_TLE_FOR_LAUNCH_YEAR_NUMBER_PIECE(
                                                                                                                                                                                                                                                                                                                                                                                    "no TLE data available for launch year {0}, launch number {1}, launch piece {2}"), NOT_TLE_LINES(
                                                                                                                                                                                                                                                                                                                                                                                            "lines {0} and {1} are not TLE lines:\n{0}: \"{2}\"\n{1}: \"{3}\""), MISSING_SECOND_TLE_LINE(
                                                                                                                                                                                                                                                                                                                                                                                                    "expected a second TLE line after line {0}:\n{0}: \"{1}\""), TLE_LINES_DO_NOT_REFER_TO_SAME_OBJECT(
                                                                                                                                                                                                                                                                                                                                                                                                            "TLE lines do not refer to the same object:\n{0}\n{1}"), TLE_INVALID_PARAMETER(
                                                                                                                                                                                                                                                                                                                                                                                                                    "invalid TLE parameter for object {0}: {1} = {2}"), TLE_CHECKSUM_ERROR(
                                                                                                                                                                                                                                                                                                                                                                                                                            "wrong checksum of TLE line {0}, expected {1} but got {2} ({3})"), NO_TLE_DATA_AVAILABLE(
                                                                                                                                                                                                                                                                                                                                                                                                                                    "no TLE data available"), NOT_POSITIVE_SPACECRAFT_MASS(
                                                                                                                                                                                                                                                                                                                                                                                                                                            "spacecraft mass is not positive: {0} kg"), TOO_LARGE_ECCENTRICITY_FOR_PROPAGATION_MODEL(
                                                                                                                                                                                                                                                                                                                                                                                                                                                    "too large eccentricity for propagation model: e = {0}"), NO_SOLAR_ACTIVITY_AT_DATE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                            "no solar activity available at {0}, data available only in range [{1}, {2}]"), NON_EXISTENT_MONTH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "non-existent month {0}"), NON_EXISTENT_YEAR_MONTH_DAY(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "non-existent date {0}-{1}-{2}"), NON_EXISTENT_WEEK_DATE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "non-existent week date {0}-W{1}-{2}"), NON_EXISTENT_DATE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "non-existent date {0}"), NON_EXISTENT_DAY_NUMBER_IN_YEAR(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "no day number {0} in year {1}"), NON_EXISTENT_HMS_TIME(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "non-existent time {0}:{1}:{2}"), NON_EXISTENT_TIME(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "non-existent time {0}"), OUT_OF_RANGE_SECONDS_NUMBER(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "out of range seconds number: {0}"), ANGLE_TYPE_NOT_SUPPORTED(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "angle type not supported, supported angles: {0}, {1} and {2}"), SATELLITE_COLLIDED_WITH_TARGET(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "satellite collided with target"), ATTITUDE_POINTING_LAW_DOES_NOT_POINT_TO_GROUND(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "attitude pointing law misses ground"), TOO_SHORT_TRANSITION_TIME_FOR_ATTITUDES_SWITCH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "{0} seconds transition time for attitudes switch is too short, should be longer than {1} seconds"), ORBIT_AND_ATTITUDE_DATES_MISMATCH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "orbit date ({0}) does not match attitude date ({1})"), FRAMES_MISMATCH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "frame {0} does not match frame {1}"), INITIAL_STATE_NOT_SPECIFIED_FOR_ORBIT_PROPAGATION(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "initial state not specified for orbit propagation"), PROPAGATOR_NOT_IN_EPHEMERIS_GENERATION_MODE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "propagator is not in ephemeris generation mode"), EVENT_DATE_TOO_CLOSE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "event date {0}, greater than {1} minus {3} seconds and smaller than {2} plus {3} seconds, cannot be added"), UNABLE_TO_READ_JPL_HEADER(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "unable to read header record from JPL ephemerides binary file {0}"), INCONSISTENT_ASTRONOMICAL_UNIT_IN_FILES(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "inconsistent values of astronomical unit in JPL ephemerides files: ({0} and {1})"), INCONSISTENT_EARTH_MOON_RATIO_IN_FILES(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "inconsistent values of Earth/Moon mass ratio in JPL ephemerides files: ({0} and {1})"), NO_DATA_LOADED_FOR_CELESTIAL_BODY(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "no data loaded for celestial body {0}"), NOT_A_JPL_EPHEMERIDES_BINARY_FILE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "file {0} is not a JPL ephemerides binary file"), NOT_A_MARSHALL_SOLAR_ACTIVITY_FUTURE_ESTIMATION_FILE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "file {0} is not a Marshall Solar Activity Future Estimation (MSAFE) file"), NO_JPL_EPHEMERIDES_BINARY_FILES_FOUND(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "no JPL ephemerides binary files found"), OUT_OF_RANGE_BODY_EPHEMERIDES_DATE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "out of range date for {0} ephemerides: {1}"), OUT_OF_RANGE_EPHEMERIDES_DATE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "out of range date for ephemerides: {0}, [{1}, {2}]"), UNEXPECTED_TWO_ELEVATION_VALUES_FOR_ONE_AZIMUTH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "unexpected two elevation values: {0} and {1}, for one azimuth: {2}"), UNSUPPORTED_PARAMETER_NAME(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "unsupported parameter name {0}, supported names: {1}"), DUPLICATED_PARAMETER_NAME(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "duplicated parameter name {0}"), UNKNOWN_ADDITIONAL_STATE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "unknown additional state \"{0}\""), UNKNOWN_MONTH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "unknown month \"{0}\""), SINGULAR_JACOBIAN_FOR_ORBIT_TYPE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "Jacobian matrix for type {0} is singular with current orbit"), STATE_JACOBIAN_NOT_INITIALIZED(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "state Jacobian has not been initialized yet"), STATE_JACOBIAN_NEITHER_6X6_NOR_7X7(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "state Jacobian is a {0}x{1} matrix, it should be either a 6x6 or a 7x7 matrix"), STATE_AND_PARAMETERS_JACOBIANS_ROWS_MISMATCH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "state Jacobian has {0} rows but parameters Jacobian has {1} rows"), STEPS_NOT_INITIALIZED_FOR_FINITE_DIFFERENCES(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "finite differences steps for force models derivatives not initialized"), INITIAL_MATRIX_AND_PARAMETERS_NUMBER_MISMATCH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "initial Jacobian matrix has {0} columns, but {1} parameters have been selected"), ORBIT_A_E_MISMATCH_WITH_CONIC_TYPE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "orbit should be either elliptic with a > 0 and e < 1 or hyperbolic with a < 0 and e > 1, a = {0}, e = {1}"), ORBIT_ANOMALY_OUT_OF_HYPERBOLIC_RANGE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "true anomaly {0} out of hyperbolic range (e = {1}, {2} < v < {3})"), HYPERBOLIC_ORBIT_NOT_HANDLED_AS(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "hyperbolic orbits cannot be handled as {0} instances"), CCSDS_DATE_INVALID_PREAMBLE_FIELD(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "invalid preamble field in CCSDS date: {0}"), CCSDS_DATE_INVALID_LENGTH_TIME_FIELD(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "invalid time field length in CCSDS date: {0}, expected {1}"), CCSDS_DATE_MISSING_AGENCY_EPOCH(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "missing agency epoch in CCSDS date"), CCSDS_UNEXPECTED_KEYWORD(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "unexpected keyword in CCSDS line number {0} of file {1}:\n{2}"), CCSDS_UNKNOWN_GM(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "the central body gravitational coefficient cannot be retrieved from the ODM"), CCSDS_UNKNOWN_SPACECRAFT_MASS(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "there is no spacecraft mass associated with this ODM file"), CCSDS_UNKNOWN_CONVENTIONS(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "no IERS conventions have been set before parsing"), CCSDS_INVALID_FRAME(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "frame {0} is not valid in this ODM file context"), CCSDS_OEM_INCONSISTENT_TIME_SYSTEMS(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "inconsistent time systems in the ephemeris blocks: {0} \u2260 {1}"), ADDITIONAL_STATE_NAME_ALREADY_IN_USE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "name \"{0}\" is already used for an additional state"), NON_RESETABLE_STATE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "reset state not allowed"), DSST_NEWCOMB_OPERATORS_COMPUTATION(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "Cannot compute Newcomb operators for sigma > rho ({0} > {1})"), DSST_VMNS_COEFFICIENT_ERROR_MS(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "Cannot compute the Vmns coefficient with m > n ({0} > {1})"), DSST_SPR_SHADOW_INCONSISTENT(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "inconsistent shadow computation: entry = {0} whereas exit = {1}"), DSST_ECC_NO_NUMERICAL_AVERAGING_METHOD(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "The current orbit has an eccentricity ({0} > 0.5). DSST needs an unimplemented time dependent numerical method to compute the averaged rates"), SP3_UNSUPPORTED_VERSION(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "unsupported sp3 file version {0}"), SP3_UNSUPPORTED_TIMESYSTEM(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "unsupported time system {0}"), SP3_UNEXPECTED_END_OF_FILE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "unexpected end of sp3 file (after line {0})"), NON_EXISTENT_GEOMAGNETIC_MODEL(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "non-existent geomagnetic model {0} for year {1}"), UNSUPPORTED_TIME_TRANSFORM(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "geomagnetic model {0} with epoch {1} does not support time transformation, no secular variation coefficients defined"), OUT_OF_RANGE_TIME_TRANSFORM(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "time transformation of geomagnetic model {0} with epoch {1} is outside its validity range: {2} != [{3}, {4}]"), NOT_ENOUGH_DATA_FOR_INTERPOLATION(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "not enough data for interpolation (sample size = {0})"), NOT_ENOUGH_CACHED_NEIGHBORS(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "too small number of cached neighbors: {0} (must be at least {1})"), NO_CACHED_ENTRIES(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "no cached entries"), NON_CHRONOLOGICALLY_SORTED_ENTRIES(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "generated entries not sorted: {0} > {1}"), NO_DATA_GENERATED(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "no data generated around date: {0}"), UNABLE_TO_GENERATE_NEW_DATA_BEFORE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "unable to generate new data before {0}"), UNABLE_TO_GENERATE_NEW_DATA_AFTER(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "unable to generate new data after {0}"), UNABLE_TO_COMPUTE_HYPERBOLIC_ECCENTRIC_ANOMALY(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "unable to compute hyperbolic eccentric anomaly from the mean anomaly after {0} iterations"), UNABLE_TO_COMPUTE_DSST_MEAN_PARAMETERS(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "unable to compute mean orbit from osculating orbit after {0} iterations"), OUT_OF_RANGE_DERIVATION_ORDER(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "derivation order {0} is out of range"), OUT_OF_RANGE_LATITUDE(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "out of range latitude: {0}, [{1}, {2}]"), ORBIT_TYPE_NOT_ALLOWED(
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    "orbit type {0} not allowed here, allowed types: {1}");

    // CHECKSTYLE: resume JavadocVariable check

    /** Base name of the resource bundle in classpath. */
    private static final String RESOURCE_BASE_NAME = "assets/org/orekit/localization/OrekitMessages";

    /** Source English format. */
    private final String sourceFormat;

    /** Simple constructor.
     * @param sourceFormat source English format to use when no
     * localized version is available
     */
    OrekitMessages(final String sourceFormat) {
        this.sourceFormat = sourceFormat;
    }

    /** {@inheritDoc} */
    public String getSourceString() {
        return sourceFormat;
    }

    /** {@inheritDoc} */
    public String getLocalizedString(final Locale locale) {
        try {
            final ResourceBundle bundle = ResourceBundle.getBundle(RESOURCE_BASE_NAME, locale, new UTF8Control());
            if (bundle.getLocale().getLanguage().equals(locale.getLanguage())) {
                final String translated = bundle.getString(name());
                if ((translated != null) && (translated.length() > 0)
                        && (!translated.toLowerCase().contains("missing translation"))) {
                    // the value of the resource is the translated format
                    return translated;
                }
            }

        } catch (MissingResourceException mre) {
            // do nothing here
        }

        // either the locale is not supported or the resource is not translated or
        // it is unknown: don't translate and fall back to using the source format
        return sourceFormat;

    }

    /** Control class loading properties in UTF-8 encoding.
     * <p>
     * This class has been very slightly adapted from BalusC answer to question: <a
     * href="http://stackoverflow.com/questions/4659929/how-to-use-utf-8-in-resource-properties-with-resourcebundle">
     * How to use UTF-8 in resource properties with ResourceBundle</a>.
     * </p>
     * @since 6.0
     */
    public static class UTF8Control extends ResourceBundle.Control {

        /** {@inheritDoc} */
        @Override
        public ResourceBundle newBundle(final String baseName, final Locale locale, final String format,
                final ClassLoader loader, final boolean reload)
                throws IllegalAccessException, InstantiationException, IOException {
            // The below is a copy of the default implementation.
            final String bundleName = toBundleName(baseName, locale);
            final String resourceName = toResourceName(bundleName, "utf8");
            ResourceBundle bundle = null;
            InputStream stream = null;
            if (reload) {
                final URL url = loader.getResource(resourceName);
                if (url != null) {
                    final URLConnection connection = url.openConnection();
                    if (connection != null) {
                        connection.setUseCaches(false);
                        stream = connection.getInputStream();
                    }
                }
            } else {
                stream = loader.getResourceAsStream(resourceName);
            }
            if (stream != null) {
                try {
                    // Only this line is changed to make it to read properties files as UTF-8.
                    bundle = new PropertyResourceBundle(new InputStreamReader(stream, "UTF-8"));
                } finally {
                    stream.close();
                }
            }
            return bundle;
        }

    }

}