Java tutorial
/* * Copyright 2001-2005 The Apache Software Foundation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package org.eredlab.g4.ccl.net.smtp; import java.io.IOException; import java.io.Writer; import java.net.InetAddress; import org.eredlab.g4.ccl.net.io.DotTerminatedMessageWriter; /*** * SMTPClient encapsulates all the functionality necessary to send files * through an SMTP server. This class takes care of all * low level details of interacting with an SMTP server and provides * a convenient higher level interface. As with all classes derived * from {@link org.apache.commons.net.SocketClient}, * you must first connect to the server with * {@link org.apache.commons.net.SocketClient#connect connect } * before doing anything, and finally * {@link org.apache.commons.net.SocketClient#disconnect disconnect } * after you're completely finished interacting with the server. * Then you need to check the SMTP reply code to see if the connection * was successful. For example: * <pre> * try { * int reply; * client.connect("mail.foobar.com"); * System.out.print(client.getReplyString()); * * // After connection attempt, you should check the reply code to verify * // success. * reply = client.getReplyCode(); * * if(!SMTPReply.isPositiveCompletion(reply)) { * client.disconnect(); * System.err.println("SMTP server refused connection."); * System.exit(1); * } * * // Do useful stuff here. * ... * } catch(IOException e) { * if(client.isConnected()) { * try { * client.disconnect(); * } catch(IOException f) { * // do nothing * } * } * System.err.println("Could not connect to server."); * e.printStackTrace(); * System.exit(1); * } * </pre> * <p> * Immediately after connecting is the only real time you need to check the * reply code (because connect is of type void). The convention for all the * SMTP command methods in SMTPClient is such that they either return a * boolean value or some other value. * The boolean methods return true on a successful completion reply from * the SMTP server and false on a reply resulting in an error condition or * failure. The methods returning a value other than boolean return a value * containing the higher level data produced by the SMTP command, or null if a * reply resulted in an error condition or failure. If you want to access * the exact SMTP reply code causing a success or failure, you must call * {@link org.apache.commons.net.smtp.SMTP#getReplyCode getReplyCode } after * a success or failure. * <p> * You should keep in mind that the SMTP server may choose to prematurely * close a connection for various reasons. The SMTPClient class will detect a * premature SMTP server connection closing when it receives a * {@link org.apache.commons.net.smtp.SMTPReply#SERVICE_NOT_AVAILABLE SMTPReply.SERVICE_NOT_AVAILABLE } * response to a command. * When that occurs, the method encountering that reply will throw * an {@link org.apache.commons.net.smtp.SMTPConnectionClosedException} * . * <code>SMTPConectionClosedException</code> * is a subclass of <code> IOException </code> and therefore need not be * caught separately, but if you are going to catch it separately, its * catch block must appear before the more general <code> IOException </code> * catch block. When you encounter an * {@link org.apache.commons.net.smtp.SMTPConnectionClosedException} * , you must disconnect the connection with * {@link #disconnect disconnect() } to properly clean up the * system resources used by SMTPClient. Before disconnecting, you may check * the last reply code and text with * {@link org.apache.commons.net.smtp.SMTP#getReplyCode getReplyCode }, * {@link org.apache.commons.net.smtp.SMTP#getReplyString getReplyString }, * and * {@link org.apache.commons.net.smtp.SMTP#getReplyStrings getReplyStrings}. * <p> * Rather than list it separately for each method, we mention here that * every method communicating with the server and throwing an IOException * can also throw a * {@link org.apache.commons.net.MalformedServerReplyException} * , which is a subclass * of IOException. A MalformedServerReplyException will be thrown when * the reply received from the server deviates enough from the protocol * specification that it cannot be interpreted in a useful manner despite * attempts to be as lenient as possible. * <p> * <p> * @author Daniel F. Savarese * @see SMTP * @see SimpleSMTPHeader * @see RelayPath * @see SMTPConnectionClosedException * @see org.apache.commons.net.MalformedServerReplyException ***/ public class SMTPClient extends SMTP { /* * Default SMTPClient constructor. Creates a new SMTPClient instance. */ //public SMTPClient() { } /*** * At least one SMTPClient method ({@link #sendMessageData sendMessageData }) * does not complete the entire sequence of SMTP commands to complete a * transaction. These types of commands require some action by the * programmer after the reception of a positive intermediate command. * After the programmer's code completes its actions, it must call this * method to receive the completion reply from the server and verify the * success of the entire transaction. * <p> * For example, * <pre> * writer = client.sendMessage(); * if(writer == null) // failure * return false; * header = * new SimpleSMTPHeader("foobar@foo.com", "foo@foobar.com", "Re: Foo"); * writer.write(header.toString()); * writer.write("This is just a test"); * writer.close(); * if(!client.completePendingCommand()) // failure * return false; * </pre> * <p> * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean completePendingCommand() throws IOException { return SMTPReply.isPositiveCompletion(getReply()); } /*** * Login to the SMTP server by sending the HELO command with the * given hostname as an argument. Before performing any mail commands, * you must first login. * <p> * @param hostname The hostname with which to greet the SMTP server. * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean login(String hostname) throws IOException { return SMTPReply.isPositiveCompletion(helo(hostname)); } /*** * Login to the SMTP server by sending the HELO command with the * client hostname as an argument. Before performing any mail commands, * you must first login. * <p> * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean login() throws IOException { String name; InetAddress host; host = getLocalAddress(); name = host.getHostName(); if (name == null) return false; return SMTPReply.isPositiveCompletion(helo(name)); } /*** * Set the sender of a message using the SMTP MAIL command, specifying * a reverse relay path. The sender must be set first before any * recipients may be specified, otherwise the mail server will reject * your commands. * <p> * @param path The reverse relay path pointing back to the sender. * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean setSender(RelayPath path) throws IOException { return SMTPReply.isPositiveCompletion(mail(path.toString())); } /*** * Set the sender of a message using the SMTP MAIL command, specifying * the sender's email address. The sender must be set first before any * recipients may be specified, otherwise the mail server will reject * your commands. * <p> * @param address The sender's email address. * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean setSender(String address) throws IOException { return SMTPReply.isPositiveCompletion(mail("<" + address + ">")); } /*** * Add a recipient for a message using the SMTP RCPT command, specifying * a forward relay path. The sender must be set first before any * recipients may be specified, otherwise the mail server will reject * your commands. * <p> * @param path The forward relay path pointing to the recipient. * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean addRecipient(RelayPath path) throws IOException { return SMTPReply.isPositiveCompletion(rcpt(path.toString())); } /*** * Add a recipient for a message using the SMTP RCPT command, the * recipient's email address. The sender must be set first before any * recipients may be specified, otherwise the mail server will reject * your commands. * <p> * @param address The recipient's email address. * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean addRecipient(String address) throws IOException { return SMTPReply.isPositiveCompletion(rcpt("<" + address + ">")); } /*** * Send the SMTP DATA command in preparation to send an email message. * This method returns a DotTerminatedMessageWriter instance to which * the message can be written. Null is returned if the DATA command * fails. * <p> * You must not issue any commands to the SMTP server (i.e., call any * (other methods) until you finish writing to the returned Writer * instance and close it. The SMTP protocol uses the same stream for * issuing commands as it does for returning results. Therefore the * returned Writer actually writes directly to the SMTP connection. * After you close the writer, you can execute new commands. If you * do not follow these requirements your program will not work properly. * <p> * You can use the provided * {@link org.apache.commons.net.smtp.SimpleSMTPHeader} * class to construct a bare minimum header. * To construct more complicated headers you should * refer to RFC 822. When the Java Mail API is finalized, you will be * able to use it to compose fully compliant Internet text messages. * The DotTerminatedMessageWriter takes care of doubling line-leading * dots and ending the message with a single dot upon closing, so all * you have to worry about is writing the header and the message. * <p> * Upon closing the returned Writer, you need to call * {@link #completePendingCommand completePendingCommand() } * to finalize the transaction and verify its success or failure from * the server reply. * <p> * @return A DotTerminatedMessageWriter to which the message (including * header) can be written. Returns null if the command fails. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public Writer sendMessageData() throws IOException { if (!SMTPReply.isPositiveIntermediate(data())) return null; return new DotTerminatedMessageWriter(_writer); } /*** * A convenience method for sending short messages. This method fetches * the Writer returned by {@link #sendMessageData sendMessageData() } * and writes the specified String to it. After writing the message, * this method calls {@link #completePendingCommand completePendingCommand() } * to finalize the transaction and returns * its success or failure. * <p> * @param message The short email message to send. * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean sendShortMessageData(String message) throws IOException { Writer writer; writer = sendMessageData(); if (writer == null) return false; writer.write(message); writer.close(); return completePendingCommand(); } /*** * A convenience method for a sending short email without having to * explicitly set the sender and recipient(s). This method * sets the sender and recipient using * {@link #setSender setSender } and * {@link #addRecipient addRecipient }, and then sends the * message using {@link #sendShortMessageData sendShortMessageData }. * <p> * @param sender The email address of the sender. * @param recipient The email address of the recipient. * @param message The short email message to send. * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean sendSimpleMessage(String sender, String recipient, String message) throws IOException { if (!setSender(sender)) return false; if (!addRecipient(recipient)) return false; return sendShortMessageData(message); } /*** * A convenience method for a sending short email without having to * explicitly set the sender and recipient(s). This method * sets the sender and recipients using * {@link #setSender setSender } and * {@link #addRecipient addRecipient }, and then sends the * message using {@link #sendShortMessageData sendShortMessageData }. * <p> * @param sender The email address of the sender. * @param recipients An array of recipient email addresses. * @param message The short email message to send. * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean sendSimpleMessage(String sender, String[] recipients, String message) throws IOException { boolean oneSuccess = false; int count; if (!setSender(sender)) return false; for (count = 0; count < recipients.length; count++) { if (addRecipient(recipients[count])) oneSuccess = true; } if (!oneSuccess) return false; return sendShortMessageData(message); } /*** * Logout of the SMTP server by sending the QUIT command. * <p> * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean logout() throws IOException { return SMTPReply.isPositiveCompletion(quit()); } /*** * Aborts the current mail transaction, resetting all server stored * sender, recipient, and mail data, cleaing all buffers and tables. * <p> * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean reset() throws IOException { return SMTPReply.isPositiveCompletion(rset()); } /*** * Verify that a username or email address is valid, i.e., that mail * can be delivered to that mailbox on the server. * <p> * @param username The username or email address to validate. * @return True if the username is valid, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean verify(String username) throws IOException { int result; result = vrfy(username); return (result == SMTPReply.ACTION_OK || result == SMTPReply.USER_NOT_LOCAL_WILL_FORWARD); } /*** * Fetches the system help information from the server and returns the * full string. * <p> * @return The system help string obtained from the server. null if the * information could not be obtained. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public String listHelp() throws IOException { if (SMTPReply.isPositiveCompletion(help())) return getReplyString(); return null; } /*** * Fetches the help information for a given command from the server and * returns the full string. * <p> * @param command The command on which to ask for help. * @return The command help string obtained from the server. null if the * information could not be obtained. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public String listHelp(String command) throws IOException { if (SMTPReply.isPositiveCompletion(help(command))) return getReplyString(); return null; } /*** * Sends a NOOP command to the SMTP server. This is useful for preventing * server timeouts. * <p> * @return True if successfully completed, false if not. * @exception SMTPConnectionClosedException * If the SMTP server prematurely closes the connection as a result * of the client being idle or some other reason causing the server * to send SMTP reply code 421. This exception may be caught either * as an IOException or independently as itself. * @exception IOException If an I/O error occurs while either sending a * command to the server or receiving a reply from the server. ***/ public boolean sendNoOp() throws IOException { return SMTPReply.isPositiveCompletion(noop()); } }