Java tutorial
/* * Copyright 2014-2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with * the License. A copy of the License is located at * * http://aws.amazon.com/apache2.0 * * or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR * CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions * and limitations under the License. */ package com.amazonaws.services.simpleemail.model; import java.io.Serializable; import javax.annotation.Generated; import com.amazonaws.AmazonWebServiceRequest; /** * <p> * Represents a request to send a single raw email using Amazon SES. For more information, see the <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Amazon SES Developer Guide</a>. * </p> * * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/email-2010-12-01/SendRawEmail" target="_top">AWS API * Documentation</a> */ @Generated("com.amazonaws:aws-java-sdk-code-generator") public class SendRawEmailRequest extends com.amazonaws.AmazonWebServiceRequest implements Serializable, Cloneable { /** * <p> * The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address * in the raw text of the message. (You can also specify both.) * </p> * <note> * <p> * Amazon SES does not support the SMTPUTF8 extension, as described in<a * href="https://tools.ietf.org/html/rfc6531">RFC6531</a>. For this reason, the <i>local part</i> of a source email * address (the part of the email address that precedes the @ sign) may only contain <a * href="https://en.wikipedia.org/wiki/Email_address#Local-part">7-bit ASCII characters</a>. If the <i>domain * part</i> of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using * Punycode, as described in <a href="https://tools.ietf.org/html/rfc3492.html">RFC3492</a>. The sender name (also * known as the <i>friendly name</i>) may contain non-ASCII characters. These characters must be encoded using MIME * encoded-word syntax, as described in <a href="https://tools.ietf.org/html/rfc2047">RFC 2047</a>. MIME * encoded-word syntax uses the following form: <code>=?charset?encoding?encoded-text?=</code>. * </p> * </note> * <p> * If you specify the <code>Source</code> parameter and have feedback forwarding enabled, then bounces and * complaints will be sent to this email address. This takes precedence over any Return-Path header that you might * include in the raw text of the message. * </p> */ private String source; /** * <p> * A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. * </p> */ private com.amazonaws.internal.SdkInternalList<String> destinations; /** * <p> * The raw email message itself. The message has to meet the following criteria: * </p> * <ul> * <li> * <p> * The message has to contain a header and a body, separated by a blank line. * </p> * </li> * <li> * <p> * All of the required header fields must be present in the message. * </p> * </li> * <li> * <p> * Each part of a multipart MIME message must be formatted properly. * </p> * </li> * <li> * <p> * Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mime-types.html">Unsupported Attachment Types</a> in * the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * The entire message must be base64-encoded. * </p> * </li> * <li> * <p> * If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, we * highly recommend that you encode that content. For more information, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Sending Raw Email</a> in the * <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * Per <a href="https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6">RFC 5321</a>, the maximum length of each line * of text, including the <CRLF>, must not exceed 1,000 characters. * </p> * </li> * </ul> */ private RawMessage rawMessage; /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to specify a particular "From" address in the header of the raw * email. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-FROM-ARN</code> in the raw message of the * email. If you use both the <code>FromArn</code> parameter and the corresponding X-header, Amazon SES uses the * value of the <code>FromArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> */ private String fromArn; /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to send for the email address specified in the <code>Source</code> * parameter. * </p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you * to send from <code>user@example.com</code>, then you would specify the <code>SourceArn</code> to be * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>Source</code> to be * <code>user@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-SOURCE-ARN</code> in the raw message of the * email. If you use both the <code>SourceArn</code> parameter and the corresponding X-header, Amazon SES uses the * value of the <code>SourceArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> */ private String sourceArn; /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to use the email address specified in the <code>ReturnPath</code> * parameter. * </p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you * to use <code>feedback@example.com</code>, then you would specify the <code>ReturnPathArn</code> to be * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>ReturnPath</code> to be * <code>feedback@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-RETURN-PATH-ARN</code> in the raw message * of the email. If you use both the <code>ReturnPathArn</code> parameter and the corresponding X-header, Amazon SES * uses the value of the <code>ReturnPathArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> */ private String returnPathArn; /** * <p> * A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you can * publish email sending events. * </p> */ private com.amazonaws.internal.SdkInternalList<MessageTag> tags; /** * <p> * The name of the configuration set to use when you send an email using <code>SendRawEmail</code>. * </p> */ private String configurationSetName; /** * Default constructor for SendRawEmailRequest object. Callers should use the setter or fluent setter (with...) * methods to initialize the object after creating it. */ public SendRawEmailRequest() { } /** * Constructs a new SendRawEmailRequest object. Callers should use the setter or fluent setter (with...) methods to * initialize any additional object members. * * @param rawMessage * The raw email message itself. The message has to meet the following criteria:</p> * <ul> * <li> * <p> * The message has to contain a header and a body, separated by a blank line. * </p> * </li> * <li> * <p> * All of the required header fields must be present in the message. * </p> * </li> * <li> * <p> * Each part of a multipart MIME message must be formatted properly. * </p> * </li> * <li> * <p> * Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, * see <a href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mime-types.html">Unsupported Attachment * Types</a> in the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * The entire message must be base64-encoded. * </p> * </li> * <li> * <p> * If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character * range, we highly recommend that you encode that content. For more information, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Sending Raw Email</a> in * the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * Per <a href="https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6">RFC 5321</a>, the maximum length of * each line of text, including the <CRLF>, must not exceed 1,000 characters. * </p> * </li> */ public SendRawEmailRequest(RawMessage rawMessage) { setRawMessage(rawMessage); } /** * <p> * The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address * in the raw text of the message. (You can also specify both.) * </p> * <note> * <p> * Amazon SES does not support the SMTPUTF8 extension, as described in<a * href="https://tools.ietf.org/html/rfc6531">RFC6531</a>. For this reason, the <i>local part</i> of a source email * address (the part of the email address that precedes the @ sign) may only contain <a * href="https://en.wikipedia.org/wiki/Email_address#Local-part">7-bit ASCII characters</a>. If the <i>domain * part</i> of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using * Punycode, as described in <a href="https://tools.ietf.org/html/rfc3492.html">RFC3492</a>. The sender name (also * known as the <i>friendly name</i>) may contain non-ASCII characters. These characters must be encoded using MIME * encoded-word syntax, as described in <a href="https://tools.ietf.org/html/rfc2047">RFC 2047</a>. MIME * encoded-word syntax uses the following form: <code>=?charset?encoding?encoded-text?=</code>. * </p> * </note> * <p> * If you specify the <code>Source</code> parameter and have feedback forwarding enabled, then bounces and * complaints will be sent to this email address. This takes precedence over any Return-Path header that you might * include in the raw text of the message. * </p> * * @param source * The identity's email address. If you do not provide a value for this parameter, you must specify a "From" * address in the raw text of the message. (You can also specify both.)</p> <note> * <p> * Amazon SES does not support the SMTPUTF8 extension, as described in<a * href="https://tools.ietf.org/html/rfc6531">RFC6531</a>. For this reason, the <i>local part</i> of a source * email address (the part of the email address that precedes the @ sign) may only contain <a * href="https://en.wikipedia.org/wiki/Email_address#Local-part">7-bit ASCII characters</a>. If the <i>domain * part</i> of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded * using Punycode, as described in <a href="https://tools.ietf.org/html/rfc3492.html">RFC3492</a>. The sender * name (also known as the <i>friendly name</i>) may contain non-ASCII characters. These characters must be * encoded using MIME encoded-word syntax, as described in <a href="https://tools.ietf.org/html/rfc2047">RFC * 2047</a>. MIME encoded-word syntax uses the following form: <code>=?charset?encoding?encoded-text?=</code> * . * </p> * </note> * <p> * If you specify the <code>Source</code> parameter and have feedback forwarding enabled, then bounces and * complaints will be sent to this email address. This takes precedence over any Return-Path header that you * might include in the raw text of the message. */ public void setSource(String source) { this.source = source; } /** * <p> * The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address * in the raw text of the message. (You can also specify both.) * </p> * <note> * <p> * Amazon SES does not support the SMTPUTF8 extension, as described in<a * href="https://tools.ietf.org/html/rfc6531">RFC6531</a>. For this reason, the <i>local part</i> of a source email * address (the part of the email address that precedes the @ sign) may only contain <a * href="https://en.wikipedia.org/wiki/Email_address#Local-part">7-bit ASCII characters</a>. If the <i>domain * part</i> of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using * Punycode, as described in <a href="https://tools.ietf.org/html/rfc3492.html">RFC3492</a>. The sender name (also * known as the <i>friendly name</i>) may contain non-ASCII characters. These characters must be encoded using MIME * encoded-word syntax, as described in <a href="https://tools.ietf.org/html/rfc2047">RFC 2047</a>. MIME * encoded-word syntax uses the following form: <code>=?charset?encoding?encoded-text?=</code>. * </p> * </note> * <p> * If you specify the <code>Source</code> parameter and have feedback forwarding enabled, then bounces and * complaints will be sent to this email address. This takes precedence over any Return-Path header that you might * include in the raw text of the message. * </p> * * @return The identity's email address. If you do not provide a value for this parameter, you must specify a "From" * address in the raw text of the message. (You can also specify both.)</p> <note> * <p> * Amazon SES does not support the SMTPUTF8 extension, as described in<a * href="https://tools.ietf.org/html/rfc6531">RFC6531</a>. For this reason, the <i>local part</i> of a * source email address (the part of the email address that precedes the @ sign) may only contain <a * href="https://en.wikipedia.org/wiki/Email_address#Local-part">7-bit ASCII characters</a>. If the * <i>domain part</i> of an address (the part after the @ sign) contains non-ASCII characters, they must be * encoded using Punycode, as described in <a href="https://tools.ietf.org/html/rfc3492.html">RFC3492</a>. * The sender name (also known as the <i>friendly name</i>) may contain non-ASCII characters. These * characters must be encoded using MIME encoded-word syntax, as described in <a * href="https://tools.ietf.org/html/rfc2047">RFC 2047</a>. MIME encoded-word syntax uses the following * form: <code>=?charset?encoding?encoded-text?=</code>. * </p> * </note> * <p> * If you specify the <code>Source</code> parameter and have feedback forwarding enabled, then bounces and * complaints will be sent to this email address. This takes precedence over any Return-Path header that you * might include in the raw text of the message. */ public String getSource() { return this.source; } /** * <p> * The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address * in the raw text of the message. (You can also specify both.) * </p> * <note> * <p> * Amazon SES does not support the SMTPUTF8 extension, as described in<a * href="https://tools.ietf.org/html/rfc6531">RFC6531</a>. For this reason, the <i>local part</i> of a source email * address (the part of the email address that precedes the @ sign) may only contain <a * href="https://en.wikipedia.org/wiki/Email_address#Local-part">7-bit ASCII characters</a>. If the <i>domain * part</i> of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using * Punycode, as described in <a href="https://tools.ietf.org/html/rfc3492.html">RFC3492</a>. The sender name (also * known as the <i>friendly name</i>) may contain non-ASCII characters. These characters must be encoded using MIME * encoded-word syntax, as described in <a href="https://tools.ietf.org/html/rfc2047">RFC 2047</a>. MIME * encoded-word syntax uses the following form: <code>=?charset?encoding?encoded-text?=</code>. * </p> * </note> * <p> * If you specify the <code>Source</code> parameter and have feedback forwarding enabled, then bounces and * complaints will be sent to this email address. This takes precedence over any Return-Path header that you might * include in the raw text of the message. * </p> * * @param source * The identity's email address. If you do not provide a value for this parameter, you must specify a "From" * address in the raw text of the message. (You can also specify both.)</p> <note> * <p> * Amazon SES does not support the SMTPUTF8 extension, as described in<a * href="https://tools.ietf.org/html/rfc6531">RFC6531</a>. For this reason, the <i>local part</i> of a source * email address (the part of the email address that precedes the @ sign) may only contain <a * href="https://en.wikipedia.org/wiki/Email_address#Local-part">7-bit ASCII characters</a>. If the <i>domain * part</i> of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded * using Punycode, as described in <a href="https://tools.ietf.org/html/rfc3492.html">RFC3492</a>. The sender * name (also known as the <i>friendly name</i>) may contain non-ASCII characters. These characters must be * encoded using MIME encoded-word syntax, as described in <a href="https://tools.ietf.org/html/rfc2047">RFC * 2047</a>. MIME encoded-word syntax uses the following form: <code>=?charset?encoding?encoded-text?=</code> * . * </p> * </note> * <p> * If you specify the <code>Source</code> parameter and have feedback forwarding enabled, then bounces and * complaints will be sent to this email address. This takes precedence over any Return-Path header that you * might include in the raw text of the message. * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withSource(String source) { setSource(source); return this; } /** * <p> * A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. * </p> * * @return A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. */ public java.util.List<String> getDestinations() { if (destinations == null) { destinations = new com.amazonaws.internal.SdkInternalList<String>(); } return destinations; } /** * <p> * A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. * </p> * * @param destinations * A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. */ public void setDestinations(java.util.Collection<String> destinations) { if (destinations == null) { this.destinations = null; return; } this.destinations = new com.amazonaws.internal.SdkInternalList<String>(destinations); } /** * <p> * A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. * </p> * <p> * <b>NOTE:</b> This method appends the values to the existing list (if any). Use * {@link #setDestinations(java.util.Collection)} or {@link #withDestinations(java.util.Collection)} if you want to * override the existing values. * </p> * * @param destinations * A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withDestinations(String... destinations) { if (this.destinations == null) { setDestinations(new com.amazonaws.internal.SdkInternalList<String>(destinations.length)); } for (String ele : destinations) { this.destinations.add(ele); } return this; } /** * <p> * A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. * </p> * * @param destinations * A list of destinations for the message, consisting of To:, CC:, and BCC: addresses. * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withDestinations(java.util.Collection<String> destinations) { setDestinations(destinations); return this; } /** * <p> * The raw email message itself. The message has to meet the following criteria: * </p> * <ul> * <li> * <p> * The message has to contain a header and a body, separated by a blank line. * </p> * </li> * <li> * <p> * All of the required header fields must be present in the message. * </p> * </li> * <li> * <p> * Each part of a multipart MIME message must be formatted properly. * </p> * </li> * <li> * <p> * Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mime-types.html">Unsupported Attachment Types</a> in * the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * The entire message must be base64-encoded. * </p> * </li> * <li> * <p> * If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, we * highly recommend that you encode that content. For more information, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Sending Raw Email</a> in the * <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * Per <a href="https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6">RFC 5321</a>, the maximum length of each line * of text, including the <CRLF>, must not exceed 1,000 characters. * </p> * </li> * </ul> * * @param rawMessage * The raw email message itself. The message has to meet the following criteria:</p> * <ul> * <li> * <p> * The message has to contain a header and a body, separated by a blank line. * </p> * </li> * <li> * <p> * All of the required header fields must be present in the message. * </p> * </li> * <li> * <p> * Each part of a multipart MIME message must be formatted properly. * </p> * </li> * <li> * <p> * Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, * see <a href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mime-types.html">Unsupported Attachment * Types</a> in the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * The entire message must be base64-encoded. * </p> * </li> * <li> * <p> * If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character * range, we highly recommend that you encode that content. For more information, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Sending Raw Email</a> in * the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * Per <a href="https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6">RFC 5321</a>, the maximum length of * each line of text, including the <CRLF>, must not exceed 1,000 characters. * </p> * </li> */ public void setRawMessage(RawMessage rawMessage) { this.rawMessage = rawMessage; } /** * <p> * The raw email message itself. The message has to meet the following criteria: * </p> * <ul> * <li> * <p> * The message has to contain a header and a body, separated by a blank line. * </p> * </li> * <li> * <p> * All of the required header fields must be present in the message. * </p> * </li> * <li> * <p> * Each part of a multipart MIME message must be formatted properly. * </p> * </li> * <li> * <p> * Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mime-types.html">Unsupported Attachment Types</a> in * the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * The entire message must be base64-encoded. * </p> * </li> * <li> * <p> * If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, we * highly recommend that you encode that content. For more information, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Sending Raw Email</a> in the * <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * Per <a href="https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6">RFC 5321</a>, the maximum length of each line * of text, including the <CRLF>, must not exceed 1,000 characters. * </p> * </li> * </ul> * * @return The raw email message itself. The message has to meet the following criteria:</p> * <ul> * <li> * <p> * The message has to contain a header and a body, separated by a blank line. * </p> * </li> * <li> * <p> * All of the required header fields must be present in the message. * </p> * </li> * <li> * <p> * Each part of a multipart MIME message must be formatted properly. * </p> * </li> * <li> * <p> * Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, * see <a href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mime-types.html">Unsupported * Attachment Types</a> in the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * The entire message must be base64-encoded. * </p> * </li> * <li> * <p> * If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character * range, we highly recommend that you encode that content. For more information, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Sending Raw Email</a> in * the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * Per <a href="https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6">RFC 5321</a>, the maximum length of * each line of text, including the <CRLF>, must not exceed 1,000 characters. * </p> * </li> */ public RawMessage getRawMessage() { return this.rawMessage; } /** * <p> * The raw email message itself. The message has to meet the following criteria: * </p> * <ul> * <li> * <p> * The message has to contain a header and a body, separated by a blank line. * </p> * </li> * <li> * <p> * All of the required header fields must be present in the message. * </p> * </li> * <li> * <p> * Each part of a multipart MIME message must be formatted properly. * </p> * </li> * <li> * <p> * Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mime-types.html">Unsupported Attachment Types</a> in * the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * The entire message must be base64-encoded. * </p> * </li> * <li> * <p> * If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, we * highly recommend that you encode that content. For more information, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Sending Raw Email</a> in the * <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * Per <a href="https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6">RFC 5321</a>, the maximum length of each line * of text, including the <CRLF>, must not exceed 1,000 characters. * </p> * </li> * </ul> * * @param rawMessage * The raw email message itself. The message has to meet the following criteria:</p> * <ul> * <li> * <p> * The message has to contain a header and a body, separated by a blank line. * </p> * </li> * <li> * <p> * All of the required header fields must be present in the message. * </p> * </li> * <li> * <p> * Each part of a multipart MIME message must be formatted properly. * </p> * </li> * <li> * <p> * Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, * see <a href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mime-types.html">Unsupported Attachment * Types</a> in the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * The entire message must be base64-encoded. * </p> * </li> * <li> * <p> * If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character * range, we highly recommend that you encode that content. For more information, see <a * href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html">Sending Raw Email</a> in * the <i>Amazon SES Developer Guide</i>. * </p> * </li> * <li> * <p> * Per <a href="https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6">RFC 5321</a>, the maximum length of * each line of text, including the <CRLF>, must not exceed 1,000 characters. * </p> * </li> * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withRawMessage(RawMessage rawMessage) { setRawMessage(rawMessage); return this; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to specify a particular "From" address in the header of the raw * email. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-FROM-ARN</code> in the raw message of the * email. If you use both the <code>FromArn</code> parameter and the corresponding X-header, Amazon SES uses the * value of the <code>FromArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @param fromArn * This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to specify a particular "From" address in the * header of the raw email.</p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-FROM-ARN</code> in the raw message * of the email. If you use both the <code>FromArn</code> parameter and the corresponding X-header, Amazon * SES uses the value of the <code>FromArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this * guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> */ public void setFromArn(String fromArn) { this.fromArn = fromArn; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to specify a particular "From" address in the header of the raw * email. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-FROM-ARN</code> in the raw message of the * email. If you use both the <code>FromArn</code> parameter and the corresponding X-header, Amazon SES uses the * value of the <code>FromArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @return This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to specify a particular "From" address in the * header of the raw email.</p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-FROM-ARN</code> in the raw message * of the email. If you use both the <code>FromArn</code> parameter and the corresponding X-header, Amazon * SES uses the value of the <code>FromArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in * this guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> */ public String getFromArn() { return this.fromArn; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to specify a particular "From" address in the header of the raw * email. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-FROM-ARN</code> in the raw message of the * email. If you use both the <code>FromArn</code> parameter and the corresponding X-header, Amazon SES uses the * value of the <code>FromArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @param fromArn * This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to specify a particular "From" address in the * header of the raw email.</p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-FROM-ARN</code> in the raw message * of the email. If you use both the <code>FromArn</code> parameter and the corresponding X-header, Amazon * SES uses the value of the <code>FromArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this * guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withFromArn(String fromArn) { setFromArn(fromArn); return this; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to send for the email address specified in the <code>Source</code> * parameter. * </p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you * to send from <code>user@example.com</code>, then you would specify the <code>SourceArn</code> to be * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>Source</code> to be * <code>user@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-SOURCE-ARN</code> in the raw message of the * email. If you use both the <code>SourceArn</code> parameter and the corresponding X-header, Amazon SES uses the * value of the <code>SourceArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @param sourceArn * This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to send for the email address specified in the * <code>Source</code> parameter.</p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that * authorizes you to send from <code>user@example.com</code>, then you would specify the * <code>SourceArn</code> to be <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the * <code>Source</code> to be <code>user@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-SOURCE-ARN</code> in the raw message * of the email. If you use both the <code>SourceArn</code> parameter and the corresponding X-header, Amazon * SES uses the value of the <code>SourceArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this * guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> */ public void setSourceArn(String sourceArn) { this.sourceArn = sourceArn; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to send for the email address specified in the <code>Source</code> * parameter. * </p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you * to send from <code>user@example.com</code>, then you would specify the <code>SourceArn</code> to be * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>Source</code> to be * <code>user@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-SOURCE-ARN</code> in the raw message of the * email. If you use both the <code>SourceArn</code> parameter and the corresponding X-header, Amazon SES uses the * value of the <code>SourceArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @return This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to send for the email address specified in the * <code>Source</code> parameter.</p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that * authorizes you to send from <code>user@example.com</code>, then you would specify the * <code>SourceArn</code> to be <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and * the <code>Source</code> to be <code>user@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-SOURCE-ARN</code> in the raw * message of the email. If you use both the <code>SourceArn</code> parameter and the corresponding * X-header, Amazon SES uses the value of the <code>SourceArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in * this guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> */ public String getSourceArn() { return this.sourceArn; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to send for the email address specified in the <code>Source</code> * parameter. * </p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you * to send from <code>user@example.com</code>, then you would specify the <code>SourceArn</code> to be * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>Source</code> to be * <code>user@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-SOURCE-ARN</code> in the raw message of the * email. If you use both the <code>SourceArn</code> parameter and the corresponding X-header, Amazon SES uses the * value of the <code>SourceArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @param sourceArn * This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to send for the email address specified in the * <code>Source</code> parameter.</p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that * authorizes you to send from <code>user@example.com</code>, then you would specify the * <code>SourceArn</code> to be <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the * <code>Source</code> to be <code>user@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-SOURCE-ARN</code> in the raw message * of the email. If you use both the <code>SourceArn</code> parameter and the corresponding X-header, Amazon * SES uses the value of the <code>SourceArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this * guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withSourceArn(String sourceArn) { setSourceArn(sourceArn); return this; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to use the email address specified in the <code>ReturnPath</code> * parameter. * </p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you * to use <code>feedback@example.com</code>, then you would specify the <code>ReturnPathArn</code> to be * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>ReturnPath</code> to be * <code>feedback@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-RETURN-PATH-ARN</code> in the raw message * of the email. If you use both the <code>ReturnPathArn</code> parameter and the corresponding X-header, Amazon SES * uses the value of the <code>ReturnPathArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @param returnPathArn * This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to use the email address specified in the * <code>ReturnPath</code> parameter.</p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that * authorizes you to use <code>feedback@example.com</code>, then you would specify the * <code>ReturnPathArn</code> to be <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and * the <code>ReturnPath</code> to be <code>feedback@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-RETURN-PATH-ARN</code> in the raw * message of the email. If you use both the <code>ReturnPathArn</code> parameter and the corresponding * X-header, Amazon SES uses the value of the <code>ReturnPathArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this * guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> */ public void setReturnPathArn(String returnPathArn) { this.returnPathArn = returnPathArn; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to use the email address specified in the <code>ReturnPath</code> * parameter. * </p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you * to use <code>feedback@example.com</code>, then you would specify the <code>ReturnPathArn</code> to be * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>ReturnPath</code> to be * <code>feedback@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-RETURN-PATH-ARN</code> in the raw message * of the email. If you use both the <code>ReturnPathArn</code> parameter and the corresponding X-header, Amazon SES * uses the value of the <code>ReturnPathArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @return This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to use the email address specified in the * <code>ReturnPath</code> parameter.</p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that * authorizes you to use <code>feedback@example.com</code>, then you would specify the * <code>ReturnPathArn</code> to be <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, * and the <code>ReturnPath</code> to be <code>feedback@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-RETURN-PATH-ARN</code> in the raw * message of the email. If you use both the <code>ReturnPathArn</code> parameter and the corresponding * X-header, Amazon SES uses the value of the <code>ReturnPathArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in * this guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> */ public String getReturnPathArn() { return this.returnPathArn; } /** * <p> * This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the * sending authorization policy that permits you to use the email address specified in the <code>ReturnPath</code> * parameter. * </p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you * to use <code>feedback@example.com</code>, then you would specify the <code>ReturnPathArn</code> to be * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>ReturnPath</code> to be * <code>feedback@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-RETURN-PATH-ARN</code> in the raw message * of the email. If you use both the <code>ReturnPathArn</code> parameter and the corresponding X-header, Amazon SES * uses the value of the <code>ReturnPathArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this guide, * or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * </note> * * @param returnPathArn * This parameter is used only for sending authorization. It is the ARN of the identity that is associated * with the sending authorization policy that permits you to use the email address specified in the * <code>ReturnPath</code> parameter.</p> * <p> * For example, if the owner of <code>example.com</code> (which has ARN * <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that * authorizes you to use <code>feedback@example.com</code>, then you would specify the * <code>ReturnPathArn</code> to be <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and * the <code>ReturnPath</code> to be <code>feedback@example.com</code>. * </p> * <p> * Instead of using this parameter, you can use the X-header <code>X-SES-RETURN-PATH-ARN</code> in the raw * message of the email. If you use both the <code>ReturnPathArn</code> parameter and the corresponding * X-header, Amazon SES uses the value of the <code>ReturnPathArn</code> parameter. * </p> * <note> * <p> * For information about when to use this parameter, see the description of <code>SendRawEmail</code> in this * guide, or see the <a href= * "https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization-delegate-sender-tasks-email.html" * >Amazon SES Developer Guide</a>. * </p> * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withReturnPathArn(String returnPathArn) { setReturnPathArn(returnPathArn); return this; } /** * <p> * A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you can * publish email sending events. * </p> * * @return A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you * can publish email sending events. */ public java.util.List<MessageTag> getTags() { if (tags == null) { tags = new com.amazonaws.internal.SdkInternalList<MessageTag>(); } return tags; } /** * <p> * A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you can * publish email sending events. * </p> * * @param tags * A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you * can publish email sending events. */ public void setTags(java.util.Collection<MessageTag> tags) { if (tags == null) { this.tags = null; return; } this.tags = new com.amazonaws.internal.SdkInternalList<MessageTag>(tags); } /** * <p> * A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you can * publish email sending events. * </p> * <p> * <b>NOTE:</b> This method appends the values to the existing list (if any). Use * {@link #setTags(java.util.Collection)} or {@link #withTags(java.util.Collection)} if you want to override the * existing values. * </p> * * @param tags * A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you * can publish email sending events. * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withTags(MessageTag... tags) { if (this.tags == null) { setTags(new com.amazonaws.internal.SdkInternalList<MessageTag>(tags.length)); } for (MessageTag ele : tags) { this.tags.add(ele); } return this; } /** * <p> * A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you can * publish email sending events. * </p> * * @param tags * A list of tags, in the form of name/value pairs, to apply to an email that you send using * <code>SendRawEmail</code>. Tags correspond to characteristics of the email that you define, so that you * can publish email sending events. * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withTags(java.util.Collection<MessageTag> tags) { setTags(tags); return this; } /** * <p> * The name of the configuration set to use when you send an email using <code>SendRawEmail</code>. * </p> * * @param configurationSetName * The name of the configuration set to use when you send an email using <code>SendRawEmail</code>. */ public void setConfigurationSetName(String configurationSetName) { this.configurationSetName = configurationSetName; } /** * <p> * The name of the configuration set to use when you send an email using <code>SendRawEmail</code>. * </p> * * @return The name of the configuration set to use when you send an email using <code>SendRawEmail</code>. */ public String getConfigurationSetName() { return this.configurationSetName; } /** * <p> * The name of the configuration set to use when you send an email using <code>SendRawEmail</code>. * </p> * * @param configurationSetName * The name of the configuration set to use when you send an email using <code>SendRawEmail</code>. * @return Returns a reference to this object so that method calls can be chained together. */ public SendRawEmailRequest withConfigurationSetName(String configurationSetName) { setConfigurationSetName(configurationSetName); return this; } /** * Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be * redacted from this string using a placeholder value. * * @return A string representation of this object. * * @see java.lang.Object#toString() */ @Override public String toString() { StringBuilder sb = new StringBuilder(); sb.append("{"); if (getSource() != null) sb.append("Source: ").append(getSource()).append(","); if (getDestinations() != null) sb.append("Destinations: ").append(getDestinations()).append(","); if (getRawMessage() != null) sb.append("RawMessage: ").append(getRawMessage()).append(","); if (getFromArn() != null) sb.append("FromArn: ").append(getFromArn()).append(","); if (getSourceArn() != null) sb.append("SourceArn: ").append(getSourceArn()).append(","); if (getReturnPathArn() != null) sb.append("ReturnPathArn: ").append(getReturnPathArn()).append(","); if (getTags() != null) sb.append("Tags: ").append(getTags()).append(","); if (getConfigurationSetName() != null) sb.append("ConfigurationSetName: ").append(getConfigurationSetName()); sb.append("}"); return sb.toString(); } @Override public boolean equals(Object obj) { if (this == obj) return true; if (obj == null) return false; if (obj instanceof SendRawEmailRequest == false) return false; SendRawEmailRequest other = (SendRawEmailRequest) obj; if (other.getSource() == null ^ this.getSource() == null) return false; if (other.getSource() != null && other.getSource().equals(this.getSource()) == false) return false; if (other.getDestinations() == null ^ this.getDestinations() == null) return false; if (other.getDestinations() != null && other.getDestinations().equals(this.getDestinations()) == false) return false; if (other.getRawMessage() == null ^ this.getRawMessage() == null) return false; if (other.getRawMessage() != null && other.getRawMessage().equals(this.getRawMessage()) == false) return false; if (other.getFromArn() == null ^ this.getFromArn() == null) return false; if (other.getFromArn() != null && other.getFromArn().equals(this.getFromArn()) == false) return false; if (other.getSourceArn() == null ^ this.getSourceArn() == null) return false; if (other.getSourceArn() != null && other.getSourceArn().equals(this.getSourceArn()) == false) return false; if (other.getReturnPathArn() == null ^ this.getReturnPathArn() == null) return false; if (other.getReturnPathArn() != null && other.getReturnPathArn().equals(this.getReturnPathArn()) == false) return false; if (other.getTags() == null ^ this.getTags() == null) return false; if (other.getTags() != null && other.getTags().equals(this.getTags()) == false) return false; if (other.getConfigurationSetName() == null ^ this.getConfigurationSetName() == null) return false; if (other.getConfigurationSetName() != null && other.getConfigurationSetName().equals(this.getConfigurationSetName()) == false) return false; return true; } @Override public int hashCode() { final int prime = 31; int hashCode = 1; hashCode = prime * hashCode + ((getSource() == null) ? 0 : getSource().hashCode()); hashCode = prime * hashCode + ((getDestinations() == null) ? 0 : getDestinations().hashCode()); hashCode = prime * hashCode + ((getRawMessage() == null) ? 0 : getRawMessage().hashCode()); hashCode = prime * hashCode + ((getFromArn() == null) ? 0 : getFromArn().hashCode()); hashCode = prime * hashCode + ((getSourceArn() == null) ? 0 : getSourceArn().hashCode()); hashCode = prime * hashCode + ((getReturnPathArn() == null) ? 0 : getReturnPathArn().hashCode()); hashCode = prime * hashCode + ((getTags() == null) ? 0 : getTags().hashCode()); hashCode = prime * hashCode + ((getConfigurationSetName() == null) ? 0 : getConfigurationSetName().hashCode()); return hashCode; } @Override public SendRawEmailRequest clone() { return (SendRawEmailRequest) super.clone(); } }