Java tutorial
/* * Copyright 2014-2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with * the License. A copy of the License is located at * * http://aws.amazon.com/apache2.0 * * or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR * CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions * and limitations under the License. */ package com.amazonaws.services.cloudwatch; import javax.annotation.Generated; import com.amazonaws.*; import com.amazonaws.regions.*; import com.amazonaws.services.cloudwatch.model.*; import com.amazonaws.services.cloudwatch.waiters.AmazonCloudWatchWaiters; /** * Interface for accessing CloudWatch. * <p> * <b>Note:</b> Do not directly implement this interface, new methods are added to it regularly. Extend from * {@link com.amazonaws.services.cloudwatch.AbstractAmazonCloudWatch} instead. * </p> * <p> * <p> * Amazon CloudWatch monitors your Amazon Web Services (AWS) resources and the applications you run on AWS in real time. * You can use CloudWatch to collect and track metrics, which are the variables you want to measure for your resources * and applications. * </p> * <p> * CloudWatch alarms send notifications or automatically change the resources you are monitoring based on rules that you * define. For example, you can monitor the CPU usage and disk reads and writes of your Amazon EC2 instances. Then, use * this data to determine whether you should launch additional instances to handle increased load. You can also use this * data to stop under-used instances to save money. * </p> * <p> * In addition to monitoring the built-in metrics that come with AWS, you can monitor your own custom metrics. With * CloudWatch, you gain system-wide visibility into resource utilization, application performance, and operational * health. * </p> */ @Generated("com.amazonaws:aws-java-sdk-code-generator") public interface AmazonCloudWatch { /** * The region metadata service name for computing region endpoints. You can use this value to retrieve metadata * (such as supported regions) of the service. * * @see RegionUtils#getRegionsForService(String) */ String ENDPOINT_PREFIX = "monitoring"; /** * Overrides the default endpoint for this client ("https://monitoring.us-east-1.amazonaws.com"). Callers can use * this method to control which AWS region they want to work with. * <p> * Callers can pass in just the endpoint (ex: "monitoring.us-east-1.amazonaws.com") or a full URL, including the * protocol (ex: "https://monitoring.us-east-1.amazonaws.com"). If the protocol is not specified here, the default * protocol from this client's {@link ClientConfiguration} will be used, which by default is HTTPS. * <p> * For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available * endpoints for all AWS services, see: <a href= * "https://docs.aws.amazon.com/sdk-for-java/v1/developer-guide/java-dg-region-selection.html#region-selection-choose-endpoint" * > https://docs.aws.amazon.com/sdk-for-java/v1/developer-guide/java-dg-region-selection.html#region-selection- * choose-endpoint</a> * <p> * <b>This method is not threadsafe. An endpoint should be configured when the client is created and before any * service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in * transit or retrying.</b> * * @param endpoint * The endpoint (ex: "monitoring.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: * "https://monitoring.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will * communicate with. * @deprecated use {@link AwsClientBuilder#setEndpointConfiguration(AwsClientBuilder.EndpointConfiguration)} for * example: * {@code builder.setEndpointConfiguration(new EndpointConfiguration(endpoint, signingRegion));} */ @Deprecated void setEndpoint(String endpoint); /** * An alternative to {@link AmazonCloudWatch#setEndpoint(String)}, sets the regional endpoint for this client's * service calls. Callers can use this method to control which AWS region they want to work with. * <p> * By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the * {@link ClientConfiguration} supplied at construction. * <p> * <b>This method is not threadsafe. A region should be configured when the client is created and before any service * requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit * or retrying.</b> * * @param region * The region this client will communicate with. See {@link Region#getRegion(com.amazonaws.regions.Regions)} * for accessing a given region. Must not be null and must be a region where the service is available. * * @see Region#getRegion(com.amazonaws.regions.Regions) * @see Region#createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration) * @see Region#isServiceSupported(String) * @deprecated use {@link AwsClientBuilder#setRegion(String)} */ @Deprecated void setRegion(Region region); /** * <p> * Deletes the specified alarms. You can delete up to 50 alarms in one operation. In the event of an error, no * alarms are deleted. * </p> * * @param deleteAlarmsRequest * @return Result of the DeleteAlarms operation returned by the service. * @throws ResourceNotFoundException * The named resource does not exist. * @sample AmazonCloudWatch.DeleteAlarms * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DeleteAlarms" target="_top">AWS API * Documentation</a> */ DeleteAlarmsResult deleteAlarms(DeleteAlarmsRequest deleteAlarmsRequest); /** * <p> * Deletes the specified anomaly detection model from your account. * </p> * * @param deleteAnomalyDetectorRequest * @return Result of the DeleteAnomalyDetector operation returned by the service. * @throws ResourceNotFoundException * The named resource does not exist. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @sample AmazonCloudWatch.DeleteAnomalyDetector * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DeleteAnomalyDetector" * target="_top">AWS API Documentation</a> */ DeleteAnomalyDetectorResult deleteAnomalyDetector(DeleteAnomalyDetectorRequest deleteAnomalyDetectorRequest); /** * <p> * Deletes all dashboards that you specify. You may specify up to 100 dashboards to delete. If there is an error * during this call, no dashboards are deleted. * </p> * * @param deleteDashboardsRequest * @return Result of the DeleteDashboards operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws DashboardNotFoundErrorException * The specified dashboard does not exist. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.DeleteDashboards * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DeleteDashboards" target="_top">AWS * API Documentation</a> */ DeleteDashboardsResult deleteDashboards(DeleteDashboardsRequest deleteDashboardsRequest); /** * <p> * Permanently deletes the specified Contributor Insights rules. * </p> * <p> * If you create a rule, delete it, and then re-create it with the same name, historical data from the first time * the rule was created may or may not be available. * </p> * * @param deleteInsightRulesRequest * @return Result of the DeleteInsightRules operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @sample AmazonCloudWatch.DeleteInsightRules * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DeleteInsightRules" target="_top">AWS * API Documentation</a> */ DeleteInsightRulesResult deleteInsightRules(DeleteInsightRulesRequest deleteInsightRulesRequest); /** * <p> * Retrieves the history for the specified alarm. You can filter the results by date range or item type. If an alarm * name is not specified, the histories for all alarms are returned. * </p> * <p> * CloudWatch retains the history of an alarm even if you delete the alarm. * </p> * * @param describeAlarmHistoryRequest * @return Result of the DescribeAlarmHistory operation returned by the service. * @throws InvalidNextTokenException * The next token specified is invalid. * @sample AmazonCloudWatch.DescribeAlarmHistory * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DescribeAlarmHistory" * target="_top">AWS API Documentation</a> */ DescribeAlarmHistoryResult describeAlarmHistory(DescribeAlarmHistoryRequest describeAlarmHistoryRequest); /** * Simplified method form for invoking the DescribeAlarmHistory operation. * * @see #describeAlarmHistory(DescribeAlarmHistoryRequest) */ DescribeAlarmHistoryResult describeAlarmHistory(); /** * <p> * Retrieves the specified alarms. If no alarms are specified, all alarms are returned. Alarms can be retrieved by * using only a prefix for the alarm name, the alarm state, or a prefix for any action. * </p> * * @param describeAlarmsRequest * @return Result of the DescribeAlarms operation returned by the service. * @throws InvalidNextTokenException * The next token specified is invalid. * @sample AmazonCloudWatch.DescribeAlarms * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DescribeAlarms" target="_top">AWS API * Documentation</a> */ DescribeAlarmsResult describeAlarms(DescribeAlarmsRequest describeAlarmsRequest); /** * Simplified method form for invoking the DescribeAlarms operation. * * @see #describeAlarms(DescribeAlarmsRequest) */ DescribeAlarmsResult describeAlarms(); /** * <p> * Retrieves the alarms for the specified metric. To filter the results, specify a statistic, period, or unit. * </p> * * @param describeAlarmsForMetricRequest * @return Result of the DescribeAlarmsForMetric operation returned by the service. * @sample AmazonCloudWatch.DescribeAlarmsForMetric * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DescribeAlarmsForMetric" * target="_top">AWS API Documentation</a> */ DescribeAlarmsForMetricResult describeAlarmsForMetric( DescribeAlarmsForMetricRequest describeAlarmsForMetricRequest); /** * <p> * Lists the anomaly detection models that you have created in your account. You can list all models in your account * or filter the results to only the models that are related to a certain namespace, metric name, or metric * dimension. * </p> * * @param describeAnomalyDetectorsRequest * @return Result of the DescribeAnomalyDetectors operation returned by the service. * @throws InvalidNextTokenException * The next token specified is invalid. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @sample AmazonCloudWatch.DescribeAnomalyDetectors * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DescribeAnomalyDetectors" * target="_top">AWS API Documentation</a> */ DescribeAnomalyDetectorsResult describeAnomalyDetectors( DescribeAnomalyDetectorsRequest describeAnomalyDetectorsRequest); /** * <p> * Returns a list of all the Contributor Insights rules in your account. All rules in your account are returned with * a single operation. * </p> * <p> * For more information about Contributor Insights, see <a * href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/ContributorInsights.html">Using Contributor * Insights to Analyze High-Cardinality Data</a>. * </p> * * @param describeInsightRulesRequest * @return Result of the DescribeInsightRules operation returned by the service. * @throws InvalidNextTokenException * The next token specified is invalid. * @sample AmazonCloudWatch.DescribeInsightRules * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DescribeInsightRules" * target="_top">AWS API Documentation</a> */ DescribeInsightRulesResult describeInsightRules(DescribeInsightRulesRequest describeInsightRulesRequest); /** * <p> * Disables the actions for the specified alarms. When an alarm's actions are disabled, the alarm actions do not * execute when the alarm state changes. * </p> * * @param disableAlarmActionsRequest * @return Result of the DisableAlarmActions operation returned by the service. * @sample AmazonCloudWatch.DisableAlarmActions * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DisableAlarmActions" target="_top">AWS * API Documentation</a> */ DisableAlarmActionsResult disableAlarmActions(DisableAlarmActionsRequest disableAlarmActionsRequest); /** * <p> * Disables the specified Contributor Insights rules. When rules are disabled, they do not analyze log groups and do * not incur costs. * </p> * * @param disableInsightRulesRequest * @return Result of the DisableInsightRules operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @sample AmazonCloudWatch.DisableInsightRules * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/DisableInsightRules" target="_top">AWS * API Documentation</a> */ DisableInsightRulesResult disableInsightRules(DisableInsightRulesRequest disableInsightRulesRequest); /** * <p> * Enables the actions for the specified alarms. * </p> * * @param enableAlarmActionsRequest * @return Result of the EnableAlarmActions operation returned by the service. * @sample AmazonCloudWatch.EnableAlarmActions * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/EnableAlarmActions" target="_top">AWS * API Documentation</a> */ EnableAlarmActionsResult enableAlarmActions(EnableAlarmActionsRequest enableAlarmActionsRequest); /** * <p> * Enables the specified Contributor Insights rules. When rules are enabled, they immediately begin analyzing log * data. * </p> * * @param enableInsightRulesRequest * @return Result of the EnableInsightRules operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @throws LimitExceededException * The operation exceeded one or more limits. * @sample AmazonCloudWatch.EnableInsightRules * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/EnableInsightRules" target="_top">AWS * API Documentation</a> */ EnableInsightRulesResult enableInsightRules(EnableInsightRulesRequest enableInsightRulesRequest); /** * <p> * Displays the details of the dashboard that you specify. * </p> * <p> * To copy an existing dashboard, use <code>GetDashboard</code>, and then use the data returned within * <code>DashboardBody</code> as the template for the new dashboard when you call <code>PutDashboard</code> to * create the copy. * </p> * * @param getDashboardRequest * @return Result of the GetDashboard operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws DashboardNotFoundErrorException * The specified dashboard does not exist. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.GetDashboard * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/GetDashboard" target="_top">AWS API * Documentation</a> */ GetDashboardResult getDashboard(GetDashboardRequest getDashboardRequest); /** * <p> * This operation returns the time series data collected by a Contributor Insights rule. The data includes the * identity and number of contributors to the log group. * </p> * <p> * You can also optionally return one or more statistics about each data point in the time series. These statistics * can include the following: * </p> * <ul> * <li> * <p> * <code>UniqueContributors</code> -- the number of unique contributors for each data point. * </p> * </li> * <li> * <p> * <code>MaxContributorValue</code> -- the value of the top contributor for each data point. The identity of the * contributor may change for each data point in the graph. * </p> * <p> * If this rule aggregates by COUNT, the top contributor for each data point is the contributor with the most * occurrences in that period. If the rule aggregates by SUM, the top contributor is the contributor with the * highest sum in the log field specified by the rule's <code>Value</code>, during that period. * </p> * </li> * <li> * <p> * <code>SampleCount</code> -- the number of data points matched by the rule. * </p> * </li> * <li> * <p> * <code>Sum</code> -- the sum of the values from all contributors during the time period represented by that data * point. * </p> * </li> * <li> * <p> * <code>Minimum</code> -- the minimum value from a single observation during the time period represented by that * data point. * </p> * </li> * <li> * <p> * <code>Maximum</code> -- the maximum value from a single observation during the time period represented by that * data point. * </p> * </li> * <li> * <p> * <code>Average</code> -- the average value from all contributors during the time period represented by that data * point. * </p> * </li> * </ul> * * @param getInsightRuleReportRequest * @return Result of the GetInsightRuleReport operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @throws ResourceNotFoundException * The named resource does not exist. * @sample AmazonCloudWatch.GetInsightRuleReport * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/GetInsightRuleReport" * target="_top">AWS API Documentation</a> */ GetInsightRuleReportResult getInsightRuleReport(GetInsightRuleReportRequest getInsightRuleReportRequest); /** * <p> * You can use the <code>GetMetricData</code> API to retrieve as many as 100 different metrics in a single request, * with a total of as many as 100,800 data points. You can also optionally perform math expressions on the values of * the returned statistics, to create new time series that represent new insights into your data. For example, using * Lambda metrics, you could divide the Errors metric by the Invocations metric to get an error rate time series. * For more information about metric math expressions, see <a * href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/using-metric-math.html#metric-math-syntax" * >Metric Math Syntax and Functions</a> in the <i>Amazon CloudWatch User Guide</i>. * </p> * <p> * Calls to the <code>GetMetricData</code> API have a different pricing structure than calls to * <code>GetMetricStatistics</code>. For more information about pricing, see <a * href="https://aws.amazon.com/cloudwatch/pricing/">Amazon CloudWatch Pricing</a>. * </p> * <p> * Amazon CloudWatch retains metric data as follows: * </p> * <ul> * <li> * <p> * Data points with a period of less than 60 seconds are available for 3 hours. These data points are * high-resolution metrics and are available only for custom metrics that have been defined with a * <code>StorageResolution</code> of 1. * </p> * </li> * <li> * <p> * Data points with a period of 60 seconds (1-minute) are available for 15 days. * </p> * </li> * <li> * <p> * Data points with a period of 300 seconds (5-minute) are available for 63 days. * </p> * </li> * <li> * <p> * Data points with a period of 3600 seconds (1 hour) are available for 455 days (15 months). * </p> * </li> * </ul> * <p> * Data points that are initially published with a shorter period are aggregated together for long-term storage. For * example, if you collect data using a period of 1 minute, the data remains available for 15 days with 1-minute * resolution. After 15 days, this data is still available, but is aggregated and retrievable only with a resolution * of 5 minutes. After 63 days, the data is further aggregated and is available with a resolution of 1 hour. * </p> * <p> * If you omit <code>Unit</code> in your request, all data that was collected with any unit is returned, along with * the corresponding units that were specified when the data was reported to CloudWatch. If you specify a unit, the * operation returns only data data that was collected with that unit specified. If you specify a unit that does not * match the data collected, the results of the operation are null. CloudWatch does not perform unit conversions. * </p> * * @param getMetricDataRequest * @return Result of the GetMetricData operation returned by the service. * @throws InvalidNextTokenException * The next token specified is invalid. * @sample AmazonCloudWatch.GetMetricData * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/GetMetricData" target="_top">AWS API * Documentation</a> */ GetMetricDataResult getMetricData(GetMetricDataRequest getMetricDataRequest); /** * <p> * Gets statistics for the specified metric. * </p> * <p> * The maximum number of data points returned from a single call is 1,440. If you request more than 1,440 data * points, CloudWatch returns an error. To reduce the number of data points, you can narrow the specified time range * and make multiple requests across adjacent time ranges, or you can increase the specified period. Data points are * not returned in chronological order. * </p> * <p> * CloudWatch aggregates data points based on the length of the period that you specify. For example, if you request * statistics with a one-hour period, CloudWatch aggregates all data points with time stamps that fall within each * one-hour period. Therefore, the number of values aggregated by CloudWatch is larger than the number of data * points returned. * </p> * <p> * CloudWatch needs raw data points to calculate percentile statistics. If you publish data using a statistic set * instead, you can only retrieve percentile statistics for this data if one of the following conditions is true: * </p> * <ul> * <li> * <p> * The SampleCount value of the statistic set is 1. * </p> * </li> * <li> * <p> * The Min and the Max values of the statistic set are equal. * </p> * </li> * </ul> * <p> * Percentile statistics are not available for metrics when any of the metric values are negative numbers. * </p> * <p> * Amazon CloudWatch retains metric data as follows: * </p> * <ul> * <li> * <p> * Data points with a period of less than 60 seconds are available for 3 hours. These data points are * high-resolution metrics and are available only for custom metrics that have been defined with a * <code>StorageResolution</code> of 1. * </p> * </li> * <li> * <p> * Data points with a period of 60 seconds (1-minute) are available for 15 days. * </p> * </li> * <li> * <p> * Data points with a period of 300 seconds (5-minute) are available for 63 days. * </p> * </li> * <li> * <p> * Data points with a period of 3600 seconds (1 hour) are available for 455 days (15 months). * </p> * </li> * </ul> * <p> * Data points that are initially published with a shorter period are aggregated together for long-term storage. For * example, if you collect data using a period of 1 minute, the data remains available for 15 days with 1-minute * resolution. After 15 days, this data is still available, but is aggregated and retrievable only with a resolution * of 5 minutes. After 63 days, the data is further aggregated and is available with a resolution of 1 hour. * </p> * <p> * CloudWatch started retaining 5-minute and 1-hour metric data as of July 9, 2016. * </p> * <p> * For information about metrics and dimensions supported by AWS services, see the <a * href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CW_Support_For_AWS.html">Amazon CloudWatch * Metrics and Dimensions Reference</a> in the <i>Amazon CloudWatch User Guide</i>. * </p> * * @param getMetricStatisticsRequest * @return Result of the GetMetricStatistics operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @throws InvalidParameterCombinationException * Parameters were used together that cannot be used together. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.GetMetricStatistics * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/GetMetricStatistics" target="_top">AWS * API Documentation</a> */ GetMetricStatisticsResult getMetricStatistics(GetMetricStatisticsRequest getMetricStatisticsRequest); /** * <p> * You can use the <code>GetMetricWidgetImage</code> API to retrieve a snapshot graph of one or more Amazon * CloudWatch metrics as a bitmap image. You can then embed this image into your services and products, such as wiki * pages, reports, and documents. You could also retrieve images regularly, such as every minute, and create your * own custom live dashboard. * </p> * <p> * The graph you retrieve can include all CloudWatch metric graph features, including metric math and horizontal and * vertical annotations. * </p> * <p> * There is a limit of 20 transactions per second for this API. Each <code>GetMetricWidgetImage</code> action has * the following limits: * </p> * <ul> * <li> * <p> * As many as 100 metrics in the graph. * </p> * </li> * <li> * <p> * Up to 100 KB uncompressed payload. * </p> * </li> * </ul> * * @param getMetricWidgetImageRequest * @return Result of the GetMetricWidgetImage operation returned by the service. * @sample AmazonCloudWatch.GetMetricWidgetImage * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/GetMetricWidgetImage" * target="_top">AWS API Documentation</a> */ GetMetricWidgetImageResult getMetricWidgetImage(GetMetricWidgetImageRequest getMetricWidgetImageRequest); /** * <p> * Returns a list of the dashboards for your account. If you include <code>DashboardNamePrefix</code>, only those * dashboards with names starting with the prefix are listed. Otherwise, all dashboards in your account are listed. * </p> * <p> * <code>ListDashboards</code> returns up to 1000 results on one page. If there are more than 1000 dashboards, you * can call <code>ListDashboards</code> again and include the value you received for <code>NextToken</code> in the * first call, to receive the next 1000 results. * </p> * * @param listDashboardsRequest * @return Result of the ListDashboards operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.ListDashboards * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/ListDashboards" target="_top">AWS API * Documentation</a> */ ListDashboardsResult listDashboards(ListDashboardsRequest listDashboardsRequest); /** * <p> * List the specified metrics. You can use the returned metrics with <a>GetMetricData</a> or * <a>GetMetricStatistics</a> to obtain statistical data. * </p> * <p> * Up to 500 results are returned for any one call. To retrieve additional results, use the returned token with * subsequent calls. * </p> * <p> * After you create a metric, allow up to fifteen minutes before the metric appears. Statistics about the metric, * however, are available sooner using <a>GetMetricData</a> or <a>GetMetricStatistics</a>. * </p> * * @param listMetricsRequest * @return Result of the ListMetrics operation returned by the service. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @sample AmazonCloudWatch.ListMetrics * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/ListMetrics" target="_top">AWS API * Documentation</a> */ ListMetricsResult listMetrics(ListMetricsRequest listMetricsRequest); /** * Simplified method form for invoking the ListMetrics operation. * * @see #listMetrics(ListMetricsRequest) */ ListMetricsResult listMetrics(); /** * <p> * Displays the tags associated with a CloudWatch resource. Alarms support tagging. * </p> * * @param listTagsForResourceRequest * @return Result of the ListTagsForResource operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws ResourceNotFoundException * The named resource does not exist. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.ListTagsForResource * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/ListTagsForResource" target="_top">AWS * API Documentation</a> */ ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest); /** * <p> * Creates an anomaly detection model for a CloudWatch metric. You can use the model to display a band of expected * normal values when the metric is graphed. * </p> * <p> * For more information, see <a * href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Anomaly_Detection.html" * >CloudWatch Anomaly Detection</a>. * </p> * * @param putAnomalyDetectorRequest * @return Result of the PutAnomalyDetector operation returned by the service. * @throws LimitExceededException * The operation exceeded one or more limits. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @sample AmazonCloudWatch.PutAnomalyDetector * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/PutAnomalyDetector" target="_top">AWS * API Documentation</a> */ PutAnomalyDetectorResult putAnomalyDetector(PutAnomalyDetectorRequest putAnomalyDetectorRequest); /** * <p> * Creates a dashboard if it does not already exist, or updates an existing dashboard. If you update a dashboard, * the entire contents are replaced with what you specify here. * </p> * <p> * All dashboards in your account are global, not region-specific. * </p> * <p> * A simple way to create a dashboard using <code>PutDashboard</code> is to copy an existing dashboard. To copy an * existing dashboard using the console, you can load the dashboard and then use the View/edit source command in the * Actions menu to display the JSON block for that dashboard. Another way to copy a dashboard is to use * <code>GetDashboard</code>, and then use the data returned within <code>DashboardBody</code> as the template for * the new dashboard when you call <code>PutDashboard</code>. * </p> * <p> * When you create a dashboard with <code>PutDashboard</code>, a good practice is to add a text widget at the top of * the dashboard with a message that the dashboard was created by script and should not be changed in the console. * This message could also point console users to the location of the <code>DashboardBody</code> script or the * CloudFormation template used to create the dashboard. * </p> * * @param putDashboardRequest * @return Result of the PutDashboard operation returned by the service. * @throws DashboardInvalidInputErrorException * Some part of the dashboard data is invalid. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.PutDashboard * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/PutDashboard" target="_top">AWS API * Documentation</a> */ PutDashboardResult putDashboard(PutDashboardRequest putDashboardRequest); /** * <p> * Creates a Contributor Insights rule. Rules evaluate log events in a CloudWatch Logs log group, enabling you to * find contributor data for the log events in that log group. For more information, see <a * href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/ContributorInsights.html">Using Contributor * Insights to Analyze High-Cardinality Data</a>. * </p> * <p> * If you create a rule, delete it, and then re-create it with the same name, historical data from the first time * the rule was created may or may not be available. * </p> * * @param putInsightRuleRequest * @return Result of the PutInsightRule operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @throws LimitExceededException * The operation exceeded one or more limits. * @sample AmazonCloudWatch.PutInsightRule * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/PutInsightRule" target="_top">AWS API * Documentation</a> */ PutInsightRuleResult putInsightRule(PutInsightRuleRequest putInsightRuleRequest); /** * <p> * Creates or updates an alarm and associates it with the specified metric, metric math expression, or anomaly * detection model. * </p> * <p> * Alarms based on anomaly detection models cannot have Auto Scaling actions. * </p> * <p> * When this operation creates an alarm, the alarm state is immediately set to <code>INSUFFICIENT_DATA</code>. The * alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then * executed. * </p> * <p> * When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous * configuration of the alarm. * </p> * <p> * If you are an IAM user, you must have Amazon EC2 permissions for some alarm operations: * </p> * <ul> * <li> * <p> * <code>iam:CreateServiceLinkedRole</code> for all alarms with EC2 actions * </p> * </li> * <li> * <p> * <code>ec2:DescribeInstanceStatus</code> and <code>ec2:DescribeInstances</code> for all alarms on EC2 instance * status metrics * </p> * </li> * <li> * <p> * <code>ec2:StopInstances</code> for alarms with stop actions * </p> * </li> * <li> * <p> * <code>ec2:TerminateInstances</code> for alarms with terminate actions * </p> * </li> * <li> * <p> * No specific permissions are needed for alarms with recover actions * </p> * </li> * </ul> * <p> * If you have read/write permissions for Amazon CloudWatch but not for Amazon EC2, you can still create an alarm, * but the stop or terminate actions are not performed. However, if you are later granted the required permissions, * the alarm actions that you created earlier are performed. * </p> * <p> * If you are using an IAM role (for example, an EC2 instance profile), you cannot stop or terminate the instance * using alarm actions. However, you can still see the alarm state and perform any other actions such as Amazon SNS * notifications or Auto Scaling policies. * </p> * <p> * If you are using temporary security credentials granted using AWS STS, you cannot stop or terminate an EC2 * instance using alarm actions. * </p> * <p> * The first time you create an alarm in the AWS Management Console, the CLI, or by using the PutMetricAlarm API, * CloudWatch creates the necessary service-linked role for you. The service-linked role is called * <code>AWSServiceRoleForCloudWatchEvents</code>. For more information, see <a href= * "https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_terms-and-concepts.html#iam-term-service-linked-role" * >AWS service-linked role</a>. * </p> * * @param putMetricAlarmRequest * @return Result of the PutMetricAlarm operation returned by the service. * @throws LimitExceededException * The quota for alarms for this customer has already been reached. * @sample AmazonCloudWatch.PutMetricAlarm * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/PutMetricAlarm" target="_top">AWS API * Documentation</a> */ PutMetricAlarmResult putMetricAlarm(PutMetricAlarmRequest putMetricAlarmRequest); /** * <p> * Publishes metric data points to Amazon CloudWatch. CloudWatch associates the data points with the specified * metric. If the specified metric does not exist, CloudWatch creates the metric. When CloudWatch creates a metric, * it can take up to fifteen minutes for the metric to appear in calls to <a>ListMetrics</a>. * </p> * <p> * You can publish either individual data points in the <code>Value</code> field, or arrays of values and the number * of times each value occurred during the period by using the <code>Values</code> and <code>Counts</code> fields in * the <code>MetricDatum</code> structure. Using the <code>Values</code> and <code>Counts</code> method enables you * to publish up to 150 values per metric with one <code>PutMetricData</code> request, and supports retrieving * percentile statistics on this data. * </p> * <p> * Each <code>PutMetricData</code> request is limited to 40 KB in size for HTTP POST requests. You can send a * payload compressed by gzip. Each request is also limited to no more than 20 different metrics. * </p> * <p> * Although the <code>Value</code> parameter accepts numbers of type <code>Double</code>, CloudWatch rejects values * that are either too small or too large. Values must be in the range of -2^360 to 2^360. In addition, special * values (for example, NaN, +Infinity, -Infinity) are not supported. * </p> * <p> * You can use up to 10 dimensions per metric to further clarify what data the metric collects. Each dimension * consists of a Name and Value pair. For more information about specifying dimensions, see <a * href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/publishingMetrics.html">Publishing * Metrics</a> in the <i>Amazon CloudWatch User Guide</i>. * </p> * <p> * Data points with time stamps from 24 hours ago or longer can take at least 48 hours to become available for * <a>GetMetricData</a> or <a>GetMetricStatistics</a> from the time they are submitted. * </p> * <p> * CloudWatch needs raw data points to calculate percentile statistics. If you publish data using a statistic set * instead, you can only retrieve percentile statistics for this data if one of the following conditions is true: * </p> * <ul> * <li> * <p> * The <code>SampleCount</code> value of the statistic set is 1 and <code>Min</code>, <code>Max</code>, and * <code>Sum</code> are all equal. * </p> * </li> * <li> * <p> * The <code>Min</code> and <code>Max</code> are equal, and <code>Sum</code> is equal to <code>Min</code> multiplied * by <code>SampleCount</code>. * </p> * </li> * </ul> * * @param putMetricDataRequest * @return Result of the PutMetricData operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws MissingRequiredParameterException * An input parameter that is required is missing. * @throws InvalidParameterCombinationException * Parameters were used together that cannot be used together. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.PutMetricData * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/PutMetricData" target="_top">AWS API * Documentation</a> */ PutMetricDataResult putMetricData(PutMetricDataRequest putMetricDataRequest); /** * <p> * Temporarily sets the state of an alarm for testing purposes. When the updated state differs from the previous * value, the action configured for the appropriate state is invoked. For example, if your alarm is configured to * send an Amazon SNS message when an alarm is triggered, temporarily changing the alarm state to <code>ALARM</code> * sends an SNS message. The alarm returns to its actual state (often within seconds). Because the alarm state * change happens quickly, it is typically only visible in the alarm's <b>History</b> tab in the Amazon CloudWatch * console or through <a>DescribeAlarmHistory</a>. * </p> * * @param setAlarmStateRequest * @return Result of the SetAlarmState operation returned by the service. * @throws ResourceNotFoundException * The named resource does not exist. * @throws InvalidFormatException * Data was not syntactically valid JSON. * @sample AmazonCloudWatch.SetAlarmState * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/SetAlarmState" target="_top">AWS API * Documentation</a> */ SetAlarmStateResult setAlarmState(SetAlarmStateRequest setAlarmStateRequest); /** * <p> * Assigns one or more tags (key-value pairs) to the specified CloudWatch resource. Currently, the only CloudWatch * resources that can be tagged are alarms. * </p> * <p> * Tags can help you organize and categorize your resources. You can also use them to scope user permissions, by * granting a user permission to access or change only resources with certain tag values. * </p> * <p> * Tags don't have any semantic meaning to AWS and are interpreted strictly as strings of characters. * </p> * <p> * You can use the <code>TagResource</code> action with an alarm that already has tags. If you specify a new tag key * for the alarm, this tag is appended to the list of tags associated with the alarm. If you specify a tag key that * is already associated with the alarm, the new tag value that you specify replaces the previous value for that * tag. * </p> * <p> * You can associate as many as 50 tags with a resource. * </p> * * @param tagResourceRequest * @return Result of the TagResource operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws ResourceNotFoundException * The named resource does not exist. * @throws ConcurrentModificationException * More than one process tried to modify a resource at the same time. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.TagResource * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/TagResource" target="_top">AWS API * Documentation</a> */ TagResourceResult tagResource(TagResourceRequest tagResourceRequest); /** * <p> * Removes one or more tags from the specified resource. * </p> * * @param untagResourceRequest * @return Result of the UntagResource operation returned by the service. * @throws InvalidParameterValueException * The value of an input parameter is bad or out-of-range. * @throws ResourceNotFoundException * The named resource does not exist. * @throws ConcurrentModificationException * More than one process tried to modify a resource at the same time. * @throws InternalServiceException * Request processing has failed due to some unknown error, exception, or failure. * @sample AmazonCloudWatch.UntagResource * @see <a href="http://docs.aws.amazon.com/goto/WebAPI/monitoring-2010-08-01/UntagResource" target="_top">AWS API * Documentation</a> */ UntagResourceResult untagResource(UntagResourceRequest untagResourceRequest); /** * Shuts down this client object, releasing any resources that might be held open. This is an optional method, and * callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client * has been shutdown, it should not be used to make any more requests. */ void shutdown(); /** * Returns additional metadata for a previously executed successful request, typically used for debugging issues * where a service isn't acting as expected. This data isn't considered part of the result data returned by an * operation, so it's available through this separate, diagnostic interface. * <p> * Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic * information for an executed request, you should use this method to retrieve it as soon as possible after * executing a request. * * @param request * The originally executed request. * * @return The response metadata for the specified request, or null if none is available. */ ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request); AmazonCloudWatchWaiters waiters(); }