Android Open Source - usb-serial-for-android Ftdi Serial Driver

• Back to Hardware/serial  ↑

From Project

Back to project page usb-serial-for-android.

License

The source code is released under:

GNU Lesser General Public License

Java Source Code

/* Copyright 2011 Google Inc.
 *//from  ww w .  jav  a 2s.  c o  m
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
 * USA.
 *
 * Project home page: http://code.google.com/p/usb-serial-for-android/
 */

package com.hoho.android.usbserial.driver;

import android.hardware.usb.UsbConstants;
import android.hardware.usb.UsbDevice;
import android.hardware.usb.UsbDeviceConnection;
import android.hardware.usb.UsbEndpoint;
import android.hardware.usb.UsbRequest;
import android.util.Log;

import com.hoho.android.usbserial.util.HexDump;

import java.io.IOException;
import java.nio.ByteBuffer;
import java.util.LinkedHashMap;
import java.util.Map;

/**
 * A {@link UsbSerialDriver} implementation for a variety of FTDI devices
 * <p>
 * This driver is based on
 * <a href="http://www.intra2net.com/en/developer/libftdi">libftdi</a>, and is
 * copyright and subject to the following terms:
 *
 * <pre>
 *   Copyright (C) 2003 by Intra2net AG
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Lesser General Public License
 *   version 2.1 as published by the Free Software Foundation;
 *
 *   opensource@intra2net.com
 *   http://www.intra2net.com/en/developer/libftdi
 * </pre>
 *
 * </p>
 * <p>
 * Some FTDI devices have not been tested; see later listing of supported and
 * unsupported devices. Devices listed as "supported" support the following
 * features:
 * <ul>
 * <li>Read and write of serial data (see {@link #read(byte[], int)} and
 * {@link #write(byte[], int)}.
 * <li>Setting baud rate (see {@link #setBaudRate(int)}).
 * </ul>
 * </p>
 * <p>
 * Supported and tested devices:
 * <ul>
 * <li>{@value DeviceType#TYPE_R}</li>
 * </ul>
 * </p>
 * <p>
 * Unsupported but possibly working devices (please contact the author with
 * feedback or patches):
 * <ul>
 * <li>{@value DeviceType#TYPE_2232C}</li>
 * <li>{@value DeviceType#TYPE_2232H}</li>
 * <li>{@value DeviceType#TYPE_4232H}</li>
 * <li>{@value DeviceType#TYPE_AM}</li>
 * <li>{@value DeviceType#TYPE_BM}</li>
 * </ul>
 * </p>
 *
 * @author mike wakerly (opensource@hoho.com)
 * @see <a href="http://code.google.com/p/usb-serial-for-android/">USB Serial
 * for Android project page</a>
 * @see <a href="http://www.ftdichip.com/">FTDI Homepage</a>
 * @see <a href="http://www.intra2net.com/en/developer/libftdi">libftdi</a>
 */
public class FtdiSerialDriver extends UsbSerialDriver {

    private static final int DEFAULT_BAUD_RATE = 115200;
    private static final int DEFAULT_DATA_BITS = DATABITS_8;
    private static final int DEFAULT_PARITY = PARITY_NONE;
    private static final int DEFAULT_STOP_BITS = STOPBITS_1;

    public static final int USB_TYPE_STANDARD = 0x00 << 5;
    public static final int USB_TYPE_CLASS = 0x00 << 5;
    public static final int USB_TYPE_VENDOR = 0x00 << 5;
    public static final int USB_TYPE_RESERVED = 0x00 << 5;

    public static final int USB_RECIP_DEVICE = 0x00;
    public static final int USB_RECIP_INTERFACE = 0x01;
    public static final int USB_RECIP_ENDPOINT = 0x02;
    public static final int USB_RECIP_OTHER = 0x03;

    public static final int USB_ENDPOINT_IN = 0x80;
    public static final int USB_ENDPOINT_OUT = 0x00;

    public static final int USB_WRITE_TIMEOUT_MILLIS = 5000;
    public static final int USB_READ_TIMEOUT_MILLIS = 5000;

    // From ftdi.h
    /**
     * Reset the port.
     */
    private static final int SIO_RESET_REQUEST = 0;

    /**
     * Set the modem control register.
     */
    private static final int SIO_MODEM_CTRL_REQUEST = 1;

    /**
     * Set flow control register.
     */
    private static final int SIO_SET_FLOW_CTRL_REQUEST = 2;

    /**
     * Set baud rate.
     */
    private static final int SIO_SET_BAUD_RATE_REQUEST = 3;

    /**
     * Set the data characteristics of the port.
     */
    private static final int SIO_SET_DATA_REQUEST = 4;

    private static final int SIO_RESET_SIO = 0;

    public static final int FTDI_DEVICE_OUT_REQTYPE =
            UsbConstants.USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_OUT;

    public static final int FTDI_DEVICE_IN_REQTYPE =
            UsbConstants.USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN;

    /**
     * Length of the modem status header, transmitted with every read.
     */
    private static final int MODEM_STATUS_HEADER_LENGTH = 2;

    private final String TAG = FtdiSerialDriver.class.getSimpleName();

    private DeviceType mType;

    /**
     * FTDI chip types.
     */
    private static enum DeviceType {
        TYPE_BM, TYPE_AM, TYPE_2232C, TYPE_R, TYPE_2232H, TYPE_4232H;
    }

    private int mInterface = 0; /* INTERFACE_ANY */

    private int mMaxPacketSize = 64; // TODO(mikey): detect

    private int mBaudRate;
    private int mDataBits;
    private int mParity;
    private int mStopBits;

    /**
     * Due to http://b.android.com/28023 , we cannot use UsbRequest async reads
     * since it gives no indication of number of bytes read. Set this to
     * {@code true} on platforms where it is fixed.
     */
    private static final boolean ENABLE_ASYNC_READS = false;

    /**
     * Constructor.
     *
     * @param usbDevice the {@link UsbDevice} to use
     * @param usbConnection the {@link UsbDeviceConnection} to use
     * @throws UsbSerialRuntimeException if the given device is incompatible
     *             with this driver
     */
    public FtdiSerialDriver(UsbDevice usbDevice, UsbDeviceConnection usbConnection) {
        super(usbDevice, usbConnection);
        mType = null;
    }

    public void reset() throws IOException {
        int result = mConnection.controlTransfer(FTDI_DEVICE_OUT_REQTYPE, SIO_RESET_REQUEST,
                SIO_RESET_SIO, 0 /* index */, null, 0, USB_WRITE_TIMEOUT_MILLIS);
        if (result != 0) {
            throw new IOException("Reset failed: result=" + result);
        }

        // TODO(mikey): autodetect.
        mType = DeviceType.TYPE_R;
    }

    @Override
    public void open() throws IOException {
        boolean opened = false;
        try {
            for (int i = 0; i < mDevice.getInterfaceCount(); i++) {
                if (mConnection.claimInterface(mDevice.getInterface(i), true)) {
                    Log.d(TAG, "claimInterface " + i + " SUCCESS");
                } else {
                    Log.d(TAG, "claimInterface " + i + " FAIL");
                }
            }
            reset();
            setParameters(DEFAULT_BAUD_RATE, DEFAULT_DATA_BITS, DEFAULT_STOP_BITS, DEFAULT_PARITY);
            opened = true;
        } finally {
            if (!opened) {
                close();
            }
        }
    }

    @Override
    public void close() {
        mConnection.close();
    }

    @Override
    public int read(byte[] dest, int timeoutMillis) throws IOException {
        final UsbEndpoint endpoint = mDevice.getInterface(0).getEndpoint(0);

        if (ENABLE_ASYNC_READS) {
            final int readAmt;
            synchronized (mReadBufferLock) {
                // mReadBuffer is only used for maximum read size.
                readAmt = Math.min(dest.length, mReadBuffer.length);
            }

            final UsbRequest request = new UsbRequest();
            request.initialize(mConnection, endpoint);

            final ByteBuffer buf = ByteBuffer.wrap(dest);
            if (!request.queue(buf, readAmt)) {
                throw new IOException("Error queueing request.");
            }

            final UsbRequest response = mConnection.requestWait();
            if (response == null) {
                throw new IOException("Null response");
            }

            final int payloadBytesRead = buf.position() - MODEM_STATUS_HEADER_LENGTH;
            if (payloadBytesRead > 0) {
                Log.d(TAG, HexDump.dumpHexString(dest, 0, Math.min(32, dest.length)));
                return payloadBytesRead;
            } else {
                return 0;
            }
        } else {
            final int totalBytesRead;

            synchronized (mReadBufferLock) {
                final int readAmt = Math.min(dest.length, mReadBuffer.length);
                totalBytesRead = mConnection.bulkTransfer(endpoint, mReadBuffer,
                        readAmt, timeoutMillis);
            }

            if (totalBytesRead < MODEM_STATUS_HEADER_LENGTH) {
                throw new IOException("Expected at least " + MODEM_STATUS_HEADER_LENGTH + " bytes");
            }

            final int payloadBytesRead = totalBytesRead - MODEM_STATUS_HEADER_LENGTH;
            if (payloadBytesRead > 0) {
                System.arraycopy(mReadBuffer, MODEM_STATUS_HEADER_LENGTH, dest, 0, payloadBytesRead);
            }
            return payloadBytesRead;
        }
    }

    @Override
    public int write(byte[] src, int timeoutMillis) throws IOException {
        final UsbEndpoint endpoint = mDevice.getInterface(0).getEndpoint(1);
        int offset = 0;

        while (offset < src.length) {
            final int writeLength;
            final int amtWritten;

            synchronized (mWriteBufferLock) {
                final byte[] writeBuffer;

                writeLength = Math.min(src.length - offset, mWriteBuffer.length);
                if (offset == 0) {
                    writeBuffer = src;
                } else {
                    // bulkTransfer does not support offsets, make a copy.
                    System.arraycopy(src, offset, mWriteBuffer, 0, writeLength);
                    writeBuffer = mWriteBuffer;
                }

                amtWritten = mConnection.bulkTransfer(endpoint, writeBuffer, writeLength,
                        timeoutMillis);
            }

            if (amtWritten <= 0) {
                throw new IOException("Error writing " + writeLength
                        + " bytes at offset " + offset + " length=" + src.length);
            }

            Log.d(TAG, "Wrote amtWritten=" + amtWritten + " attempted=" + writeLength);
            offset += amtWritten;
        }
        return offset;
    }

    @Override
    @Deprecated
    public int setBaudRate(int baudRate) throws IOException {
        long[] vals = convertBaudrate(baudRate);
        long actualBaudrate = vals[0];
        long index = vals[1];
        long value = vals[2];
        int result = mConnection.controlTransfer(FTDI_DEVICE_OUT_REQTYPE,
                SIO_SET_BAUD_RATE_REQUEST, (int) value, (int) index,
                null, 0, USB_WRITE_TIMEOUT_MILLIS);
        if (result != 0) {
            throw new IOException("Setting baudrate failed: result=" + result);
        }
        return (int) actualBaudrate;
    }

    @Override
    public void setParameters(int baudRate, int dataBits, int stopBits, int parity)
            throws IOException {
        mBaudRate = setBaudRate(baudRate);

        int config = dataBits;

        switch (parity) {
            case PARITY_NONE:
                config |= (0x00 << 8);
                break;
            case PARITY_ODD:
                config |= (0x01 << 8);
                break;
            case PARITY_EVEN:
                config |= (0x02 << 8);
                break;
            case PARITY_MARK:
                config |= (0x03 << 8);
                break;
            case PARITY_SPACE:
                config |= (0x04 << 8);
                break;
            default:
                throw new IllegalArgumentException("Unknown parity value: " + parity);
        }

        switch (stopBits) {
            case STOPBITS_1:
                config |= (0x00 << 11);
                break;
            case STOPBITS_1_5:
                config |= (0x01 << 11);
                break;
            case STOPBITS_2:
                config |= (0x02 << 11);
                break;
            default:
                throw new IllegalArgumentException("Unknown stopBits value: " + stopBits);
        }

        int result = mConnection.controlTransfer(FTDI_DEVICE_OUT_REQTYPE,
                SIO_SET_DATA_REQUEST, config, 0 /* index */,
                null, 0, USB_WRITE_TIMEOUT_MILLIS);
        if (result != 0) {
            throw new IOException("Setting parameters failed: result=" + result);
        }

        mParity = parity;
        mStopBits = stopBits;
        mDataBits = dataBits;
    }

    private long[] convertBaudrate(int baudrate) {
        // TODO(mikey): Braindead transcription of libfti method.  Clean up,
        // using more idiomatic Java where possible.
        int divisor = 24000000 / baudrate;
        int bestDivisor = 0;
        int bestBaud = 0;
        int bestBaudDiff = 0;
        int fracCode[] = {
                0, 3, 2, 4, 1, 5, 6, 7
        };

        for (int i = 0; i < 2; i++) {
            int tryDivisor = divisor + i;
            int baudEstimate;
            int baudDiff;

            if (tryDivisor <= 8) {
                // Round up to minimum supported divisor
                tryDivisor = 8;
            } else if (mType != DeviceType.TYPE_AM && tryDivisor < 12) {
                // BM doesn't support divisors 9 through 11 inclusive
                tryDivisor = 12;
            } else if (divisor < 16) {
                // AM doesn't support divisors 9 through 15 inclusive
                tryDivisor = 16;
            } else {
                if (mType == DeviceType.TYPE_AM) {
                    // TODO
                } else {
                    if (tryDivisor > 0x1FFFF) {
                        // Round down to maximum supported divisor value (for
                        // BM)
                        tryDivisor = 0x1FFFF;
                    }
                }
            }

            // Get estimated baud rate (to nearest integer)
            baudEstimate = (24000000 + (tryDivisor / 2)) / tryDivisor;

            // Get absolute difference from requested baud rate
            if (baudEstimate < baudrate) {
                baudDiff = baudrate - baudEstimate;
            } else {
                baudDiff = baudEstimate - baudrate;
            }

            if (i == 0 || baudDiff < bestBaudDiff) {
                // Closest to requested baud rate so far
                bestDivisor = tryDivisor;
                bestBaud = baudEstimate;
                bestBaudDiff = baudDiff;
                if (baudDiff == 0) {
                    // Spot on! No point trying
                    break;
                }
            }
        }

        // Encode the best divisor value
        long encodedDivisor = (bestDivisor >> 3) | (fracCode[bestDivisor & 7] << 14);
        // Deal with special cases for encoded value
        if (encodedDivisor == 1) {
            encodedDivisor = 0; // 3000000 baud
        } else if (encodedDivisor == 0x4001) {
            encodedDivisor = 1; // 2000000 baud (BM only)
        }

        // Split into "value" and "index" values
        long value = encodedDivisor & 0xFFFF;
        long index;
        if (mType == DeviceType.TYPE_2232C || mType == DeviceType.TYPE_2232H
                || mType == DeviceType.TYPE_4232H) {
            index = (encodedDivisor >> 8) & 0xffff;
            index &= 0xFF00;
            index |= 0 /* TODO mIndex */;
        } else {
            index = (encodedDivisor >> 16) & 0xffff;
        }

        // Return the nearest baud rate
        return new long[] {
                bestBaud, index, value
        };
    }

    @Override
    public boolean getCD() throws IOException {
        return false;
    }

    @Override
    public boolean getCTS() throws IOException {
        return false;
    }

    @Override
    public boolean getDSR() throws IOException {
        return false;
    }

    @Override
    public boolean getDTR() throws IOException {
        return false;
    }

    @Override
    public void setDTR(boolean value) throws IOException {
    }

    @Override
    public boolean getRI() throws IOException {
        return false;
    }

    @Override
    public boolean getRTS() throws IOException {
        return false;
    }

    @Override
    public void setRTS(boolean value) throws IOException {
    }

    public static Map<Integer, int[]> getSupportedDevices() {
        final Map<Integer, int[]> supportedDevices = new LinkedHashMap<Integer, int[]>();
        supportedDevices.put(Integer.valueOf(UsbId.VENDOR_FTDI),
                new int[] {
                    UsbId.FTDI_FT232R,
                });
        return supportedDevices;
    }

}

Java Source Code List

• Back to Hardware/serial  ↑