Back to project page android-chat-telnet.
The source code is released under:
GNU Lesser General Public License
If you think the Android project android-chat-telnet listed in this page is inappropriate, such as containing malicious code/tools or violating the copyright, please email info at java2s dot com, thanks.
/* * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. * The ASF licenses this file to You under the Apache License, Version 2.0 * (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at */*from w ww . j a v a 2 s. co m*/ * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package org.apache.commons.net.io; import java.io.Closeable; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import java.io.Reader; import java.io.Writer; import java.net.Socket; /*** * The Util class cannot be instantiated and stores short static convenience * methods that are often quite useful. * <p> * <p> * @see CopyStreamException * @see CopyStreamListener * @see CopyStreamAdapter ***/ public final class Util { /** * The default buffer size ({@value}) used by * {@link #copyStream copyStream } and {@link #copyReader copyReader} * and by the copyReader/copyStream methods if a zero or negative buffer size is supplied. */ public static final int DEFAULT_COPY_BUFFER_SIZE = 1024; // Cannot be instantiated private Util() { } /*** * Copies the contents of an InputStream to an OutputStream using a * copy buffer of a given size and notifies the provided * CopyStreamListener of the progress of the copy operation by calling * its bytesTransferred(long, int) method after each write to the * destination. If you wish to notify more than one listener you should * use a CopyStreamAdapter as the listener and register the additional * listeners with the CopyStreamAdapter. * <p> * The contents of the InputStream are * read until the end of the stream is reached, but neither the * source nor the destination are closed. You must do this yourself * outside of the method call. The number of bytes read/written is * returned. * <p> * @param source The source InputStream. * @param dest The destination OutputStream. * @param bufferSize The number of bytes to buffer during the copy. * A zero or negative value means to use {@link #DEFAULT_COPY_BUFFER_SIZE}. * @param streamSize The number of bytes in the stream being copied. * Should be set to CopyStreamEvent.UNKNOWN_STREAM_SIZE if unknown. * @param listener The CopyStreamListener to notify of progress. If * this parameter is null, notification is not attempted. * @param flush Whether to flush the output stream after every * write. This is necessary for interactive sessions that rely on * buffered streams. If you don't flush, the data will stay in * the stream buffer. * @exception CopyStreamException If an error occurs while reading from the * source or writing to the destination. The CopyStreamException * will contain the number of bytes confirmed to have been * transferred before an * IOException occurred, and it will also contain the IOException * that caused the error. These values can be retrieved with * the CopyStreamException getTotalBytesTransferred() and * getIOException() methods. ***/ public static final long copyStream(InputStream source, OutputStream dest, int bufferSize, long streamSize, CopyStreamListener listener, boolean flush) throws CopyStreamException { int bytes; long total = 0; byte[] buffer = new byte[bufferSize >= 0 ? bufferSize : DEFAULT_COPY_BUFFER_SIZE]; try { while ((bytes = source.read(buffer)) != -1) { // Technically, some read(byte[]) methods may return 0 and we cannot // accept that as an indication of EOF. if (bytes == 0) { bytes = source.read(); if (bytes < 0) { break; } dest.write(bytes); if(flush) { dest.flush(); } ++total; if (listener != null) { listener.bytesTransferred(total, 1, streamSize); } continue; } dest.write(buffer, 0, bytes); if(flush) { dest.flush(); } total += bytes; if (listener != null) { listener.bytesTransferred(total, bytes, streamSize); } } } catch (IOException e) { throw new CopyStreamException("IOException caught while copying.", total, e); } return total; } /*** * Copies the contents of an InputStream to an OutputStream using a * copy buffer of a given size and notifies the provided * CopyStreamListener of the progress of the copy operation by calling * its bytesTransferred(long, int) method after each write to the * destination. If you wish to notify more than one listener you should * use a CopyStreamAdapter as the listener and register the additional * listeners with the CopyStreamAdapter. * <p> * The contents of the InputStream are * read until the end of the stream is reached, but neither the * source nor the destination are closed. You must do this yourself * outside of the method call. The number of bytes read/written is * returned. * <p> * @param source The source InputStream. * @param dest The destination OutputStream. * @param bufferSize The number of bytes to buffer during the copy. * A zero or negative value means to use {@link #DEFAULT_COPY_BUFFER_SIZE}. * @param streamSize The number of bytes in the stream being copied. * Should be set to CopyStreamEvent.UNKNOWN_STREAM_SIZE if unknown. * @param listener The CopyStreamListener to notify of progress. If * this parameter is null, notification is not attempted. * @exception CopyStreamException If an error occurs while reading from the * source or writing to the destination. The CopyStreamException * will contain the number of bytes confirmed to have been * transferred before an * IOException occurred, and it will also contain the IOException * that caused the error. These values can be retrieved with * the CopyStreamException getTotalBytesTransferred() and * getIOException() methods. ***/ public static final long copyStream(InputStream source, OutputStream dest, int bufferSize, long streamSize, CopyStreamListener listener) throws CopyStreamException { return copyStream(source, dest, bufferSize, streamSize, listener, true); } /*** * Copies the contents of an InputStream to an OutputStream using a * copy buffer of a given size. The contents of the InputStream are * read until the end of the stream is reached, but neither the * source nor the destination are closed. You must do this yourself * outside of the method call. The number of bytes read/written is * returned. * <p> * @param source The source InputStream. * @param dest The destination OutputStream. * @param bufferSize The number of bytes to buffer during the copy. * A zero or negative value means to use {@link #DEFAULT_COPY_BUFFER_SIZE}. * @return The number of bytes read/written in the copy operation. * @exception CopyStreamException If an error occurs while reading from the * source or writing to the destination. The CopyStreamException * will contain the number of bytes confirmed to have been * transferred before an * IOException occurred, and it will also contain the IOException * that caused the error. These values can be retrieved with * the CopyStreamException getTotalBytesTransferred() and * getIOException() methods. ***/ public static final long copyStream(InputStream source, OutputStream dest, int bufferSize) throws CopyStreamException { return copyStream(source, dest, bufferSize, CopyStreamEvent.UNKNOWN_STREAM_SIZE, null); } /*** * Same as <code> copyStream(source, dest, DEFAULT_COPY_BUFFER_SIZE); </code> ***/ public static final long copyStream(InputStream source, OutputStream dest) throws CopyStreamException { return copyStream(source, dest, DEFAULT_COPY_BUFFER_SIZE); } /*** * Copies the contents of a Reader to a Writer using a * copy buffer of a given size and notifies the provided * CopyStreamListener of the progress of the copy operation by calling * its bytesTransferred(long, int) method after each write to the * destination. If you wish to notify more than one listener you should * use a CopyStreamAdapter as the listener and register the additional * listeners with the CopyStreamAdapter. * <p> * The contents of the Reader are * read until its end is reached, but neither the source nor the * destination are closed. You must do this yourself outside of the * method call. The number of characters read/written is returned. * <p> * @param source The source Reader. * @param dest The destination writer. * @param bufferSize The number of characters to buffer during the copy. * A zero or negative value means to use {@link #DEFAULT_COPY_BUFFER_SIZE}. * @param streamSize The number of characters in the stream being copied. * Should be set to CopyStreamEvent.UNKNOWN_STREAM_SIZE if unknown. * @param listener The CopyStreamListener to notify of progress. If * this parameter is null, notification is not attempted. * @return The number of characters read/written in the copy operation. * @exception CopyStreamException If an error occurs while reading from the * source or writing to the destination. The CopyStreamException * will contain the number of bytes confirmed to have been * transferred before an * IOException occurred, and it will also contain the IOException * that caused the error. These values can be retrieved with * the CopyStreamException getTotalBytesTransferred() and * getIOException() methods. ***/ public static final long copyReader(Reader source, Writer dest, int bufferSize, long streamSize, CopyStreamListener listener) throws CopyStreamException { int chars; long total = 0; char[] buffer = new char[bufferSize >= 0 ? bufferSize : DEFAULT_COPY_BUFFER_SIZE]; try { while ((chars = source.read(buffer)) != -1) { // Technically, some read(char[]) methods may return 0 and we cannot // accept that as an indication of EOF. if (chars == 0) { chars = source.read(); if (chars < 0) { break; } dest.write(chars); dest.flush(); ++total; if (listener != null) { listener.bytesTransferred(total, chars, streamSize); } continue; } dest.write(buffer, 0, chars); dest.flush(); total += chars; if (listener != null) { listener.bytesTransferred(total, chars, streamSize); } } } catch (IOException e) { throw new CopyStreamException("IOException caught while copying.", total, e); } return total; } /*** * Copies the contents of a Reader to a Writer using a * copy buffer of a given size. The contents of the Reader are * read until its end is reached, but neither the source nor the * destination are closed. You must do this yourself outside of the * method call. The number of characters read/written is returned. * <p> * @param source The source Reader. * @param dest The destination writer. * @param bufferSize The number of characters to buffer during the copy. * A zero or negative value means to use {@link #DEFAULT_COPY_BUFFER_SIZE}. * @return The number of characters read/written in the copy operation. * @exception CopyStreamException If an error occurs while reading from the * source or writing to the destination. The CopyStreamException * will contain the number of bytes confirmed to have been * transferred before an * IOException occurred, and it will also contain the IOException * that caused the error. These values can be retrieved with * the CopyStreamException getTotalBytesTransferred() and * getIOException() methods. ***/ public static final long copyReader(Reader source, Writer dest, int bufferSize) throws CopyStreamException { return copyReader(source, dest, bufferSize, CopyStreamEvent.UNKNOWN_STREAM_SIZE, null); } /*** * Same as <code> copyReader(source, dest, DEFAULT_COPY_BUFFER_SIZE); </code> ***/ public static final long copyReader(Reader source, Writer dest) throws CopyStreamException { return copyReader(source, dest, DEFAULT_COPY_BUFFER_SIZE); } /** * Closes the object quietly, catching rather than throwing IOException. * Intended for use from finally blocks. * * @param closeable the object to close, may be {@code null} * @since 3.0 */ public static void closeQuietly(Closeable closeable) { if (closeable != null) { try { closeable.close(); } catch (IOException e) { } } } /** * Closes the socket quietly, catching rather than throwing IOException. * Intended for use from finally blocks. * * @param socket the socket to close, may be {@code null} * @since 3.0 */ public static void closeQuietly(Socket socket) { if (socket != null) { try { socket.close(); } catch (IOException e) { } } } }